Back to top
Northridge4x4 Call
Shopping Cart - $0.00

You have no items in your shopping cart.

Northridge4x4 Call

Reid JK Steering Knuckle Left Side

Product Description

The new Jeep Wrangler JK Dana 30/Rubicon 44 knuckles are heavy duty stock replacement knuckles. Raised steering linkage, dual steering stops, and increased strength are the primary improvements while installation is simplified by allowing the OEM -outers- to be reused.
*Uses stock 2007+ Jeep Wrangler JK brake rotors, calipers, stub shafts and U-joints.
*Fits JK Dana 30, JK Rubicon Dana 44, and Mopar & aftermarket JK axles.
*Easy bolt-on installation with no machining required.
*Aftermarket high strength axle shafts, U-joints/CV joints, and stub shafts can be used.
*Antilock Brakes, Traction Control, and Electronic Stability Control systems remain fully operational.
*Steering linkage is raised as high as possible while retaining clearance for OEM Jeep and most aftermarket wheels.
*Tie Rod gains 1.5 inches of clearance to minimize vulnerability to trail damage.
*Drag Link is flipped and gains 3 inches of height to perfectly correct the steering geometry for the common 3-4 inch suspension lift; minimizes additional steering correction for taller suspension lifts. Requires an aftermarket drag link, and we recommend a track bar bracket to eliminate bump steer.
*Cast from high strength ductile iron.
*Beefed up with extra material and ribbing.
*Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures.
*Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures.
*Tapered tie rod holes accept heavy-duty 1-ton tie rod ends used in most aftermarket steering linkage; factory tie rod ends may require slight modification.
*Tie rod holes can be drilled to accept 3/4 inch heim ends.
*Powder coated bright orange for long lasting looks.

Additional Information

Additional Information

Fits JK 2DR 2007 - 2015, JK 4DR 2007 - 2015
Video URL No

Customer Reviews

Bookend your front axle Review by RockTrooper
Going big with lift and tires? The best way to raise your tie rod and draglink from the factory locations is by getting the Reid knuckles. Very easy to install and worth the benefits. Northridge priced matched and shipped these quickly to my door for the weekend install with great customer service to boot! (Posted on 3/23/2015)
One of the best upgrades for your axles Review by SAFARISHAWN
The great thing about this product is it will work with most axle modifications even if you replace your axle (as long as it is set up to take the Dana44 knuckles). Super easy to install and a perfect way to raise your tie-rod and drag-link. HUGE improvement over the stock knuckles! (Posted on 3/22/2015)

Write Your Own Review

Only registered users can write reviews. Please, log in or register