JK 3.5in Long arm front/short arm rear Suspension Lift Kit (8 pkg 200 lbs)

Clayton Off Road Inc. is known for building the ultimate in Jeep long arm kits and our new JK long arm kit is no exception. The lower arms use our tried and proven 2x2 1/4 wall square tubing and carry our lifetime warranty against bending or breaking.

Another key feature with the new JK front long arm kit is our bolt-in 3 piece cross member. The cross member bolts into the OEM location and has pockets for the forged 2.5 inch johnny joints which allows for maximum ground clearance. This cross member can be simply bolted in, or it is also setup so it can be welded in for the more abusive drivers. Like all other Clayton Off Road cross members the center section is removable, making any transmission changes simple and can be done without touching any suspension arms. This 3 piece cross member was designed using the latest 3D Solid Works program, CNC laser cut, and CNC bent from 3/16s for maximum strength and accuracy.

This JK suspension lift systems is designed to give a smooth ride while maintaining excellent handling characteristics. Our 3.5 inch complete system is designed to let you run a 35 inch tire. These are complete bolt on systems and can be installed using basic shop tools. Our systems include eight adjustable control arms which feature either Currie Johnny Joints or Clevite mechanically bonded rubber bushings. An adjustable front track bar and rear track bar relocation bracket are used with our systems. An optional adjustable rear track bar is available for use with the rear track bar relocation bracket for fine-tuning the rear track or to allow pinion angle adjustments when using a CV style drive shaft. Rear extended sway bar links, front and rear bump stops, front and rear extended brake lines, and 3.5 inch coils springs are supplied to complete our lift suspension systems.

On 2010-2011 models minor exhaust modification maybe necessary. This kit is NOT intended for the new 2012 JK drivetrain!