We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- The car you have selected might have no fitting parts in this category
- Try changing some of your filters below:
Features & Product Details
The Evo Manufacturing Double D Pro Suspension System consists of several vital components that make for a serious suspension setup. This suspension setup will allow the off-road enthusiast to further dwell into adventures in areas that would otherwise be limited with stock suspension.
The Double D Pro Suspension System will provide 12” of usable wheel travel, and comes with custom built brackets for the lowest center of gravity. Additionally, Evo Manufacturing’s SPEC valving and spring rates have been specifically dialed in for the best handling as possible.
Here is a list of vital components included in the Double D Pro Suspension System:
• Evo Manufacturing Double D Bolt-On Long Arm Upgrade
• Evo Manufacturing Front LCG Bolt-On Coilover Kit
• Evo Manufacturing D44 Rear LCG Bolt-On Coilover Kit
• Evo Manufacturing JK Draglink Flip Kit
Additional features include:
• Height Adjustable
• Front and Rear Location
• Compression Adjustable
• Bolt-on/Weld-on installation method
• Rebound Adjustable
• 3.0-5.0” of lift
• Hardware included
• Shocks inclued
When lifting your vehicle 3” or higher, the steering geometry will be altered with the lift. With that said, the steering geometry will be out of spec, and this can be corrected using the Evo Manufacturing Drag Link Flip Kit.
The Flip Kit has been designed to raise the track bar mounting location 3” at the axle to correct the roll center, and steering angles of a lifted JK. Once the roll center is corrected, you will have improved handling of the vehicle in both on, and off-road conditions.This is a complete bolt-on design that provides better strength to already a prone to failure factory front track bar bracket. This kit comes complete with new forged drag links, and all bracketry has been crafted from 3/16” thick laser cut, and CNC bent sheet metal.
All bracketry is finished in a corrosion resistant black powder-coat finish, and also integrated is a new steering stabilizer location built in to keep it out of the way, and above the tie rod.
Please note that drilling of the passenger side steering knuckle with a 7/8” drill bit is required to complete the install.
When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO JK Draglink Flip Kit does just that and more. The Evo MFG Drag Link Flip Kit will bring the steering geometry back within spec which will also improve the vehicle’s overall handling both on and off road.
This kit comes complete with a forged drag link. Also included are 3/16” thick laser cut and CNC bent brackets that come in a black powder coated finish to resist corrosion. With the new location of the steering stabilizer, expect more clearance just above the tie rod.