Dana Ultimate 60 Front and Rear Axles

The Dana 60 Ultimate front axle

 

The Dana 60 Ultimate front axle 5.38 is a vehicle accessory that uses electric differential locking to provide enhanced power for propulsion. The locking of the Jeeps's differential to the use of the 5.38 gear ratio is effective in that it gives the vehicle a constant and stable power output setting which not only provides improved strength for the vehicle but also effective control of the automobile for the driver.

Dana 60 Ultimate front axle features

 

The Dana 60 Ultimate front axle 5.38 comes equipped with steel axle shafts which are instrumental when it comes to travels and expeditions in the Off Road pathways. It can withstand and provide power for the rocky and mud patches to ensure the strength of the vehicle is kept constant. The U-joints that come with the Dana 60 Ultimate front axle 5.38 are structured to provide optimal operational capacity for lifted cars that have been customized with larger Northridge tires and wheels and increased ground clearance.

More Dana 60 axels

The Dana 60 Ultimate front axle 4.88 is an automobile accessory that provides a vehicle with maximum strength especially when the automobile has been customized with larger tires for the rough terrains. It can ensure that power from the engine is effectively converted to the strength that can propel the vehicle with ease. This is done through the locking of the differential which is done electronically to give the automobile a seamless transmission system for the power that is being relayed to the wheels.
The Dana 60 Ultimate front axle 4.88 allows a vehicle to have higher torque load which is perfect for improving the strength of the automobile and ensuring that increased power is sustained over distances. It utilizes the 4.88 gear ratio system to generate the appropriate power required. The unit comes equipped with HD brakes which integrate with the relay system of the wheels to provide overall experience for drivers.

Dana 60 Front Axle

The Dana 60 Ultimate front axle 5.38 comes equipped with steel axle shafts which are instrumental when it comes to travels and expeditions in the Off Road pathways. It can withstand and provide power for the rocky and mud patches to ensure the strength of the vehicle is kept constant. The U-joints that come with the Dana 60 Ultimate front axle 5.38 are structured to provide optimal operational capacity for lifted cars that have been customized with larger wheels and increased ground clearance. NOTE: THIS AXLE CONTAINS THE ARB AIR LOCKER

The Dana 60 Ultimate front axle 5.38 comes equipped with steel axle shafts which are instrumental when it comes to travels and expeditions in the Off Road pathways. It can withstand and provide power for the rocky and mud patches to ensure the strength of the vehicle is kept constant. The U-joints that come with the Dana 60 Ultimate front axle 5.38 are structured to provide optimal operational capacity for lifted cars that have been customized with larger wheels and increased ground clearance. NOTE: THIS AXLE CONTAINS THE ARB AIR LOCKER

The Ultimate Dana 60 Rear Axle Assembly contains several attributes that make it one of the strongest axles available on the market today. This axle features Spicer® SPL®70 universal joints which is perfect for vehicles with altered lifts, and larger tires. 

Some of the components include Spicer® 35 Spline SAE-4340 nickel chromoly steel axle shafts that can handle rigorous conditions of the off-road. Improvements in the design will give the driver the advantage across all terrains, and makes for the perfect addition to your altered suspension setup.

Here are additional specs of the Ultimate Dana 60 Rear Axle Assembly with brakes:

•    Full float design, vehicle weight is carried by the housing instead of the shaft which delivers greater load-carrying ability
•    35 Spline SAE-4340 nickel chromoly steel axle shafts
•    Selectable electronic locking differentials
•    Upgraded heavy-duty brakes with plug and play ABS system
•    Large  vented rotors (358mm) and dual piston calipers for optimal braking power, and optimal cooling
•    Ideal on and off road stopping power for vehicles equipped with larger wheels and tires
•    Spicer 9.75” (248mm) ring and pinion inside
•    3.5” outside diameter/.390” wall thickness axle tubes
•    Heavy Duty 8 X 6.5” wheel bolt pattern
•    Nodular iron diff cover
•    5.38 Gear ratio

The Ultimate Dana 60 Rear Axle Assembly contains several attributes that make it one of the strongest axles available on the market today. This axle features Spicer® SPL®70 universal joints which is perfect for vehicles with altered lifts, and larger tires. 

Some of the components include Spicer® 35 Spline SAE-4340 nickel chromoly steel axle shafts that can handle rigorous conditions of the off-road. Improvements in the design will give the driver the advantage across all terrains, and makes for the perfect addition to your altered suspension setup.

Here are additional specs of the Ultimate Dana 60 Rear Axle Assembly with brakes:

•    Full float design, vehicle weight is carried by the housing instead of the shaft which delivers greater load-carrying ability
•    35 Spline SAE-4340 nickel chromoly steel axle shafts
•    Selectable electronic locking differentials
•    Upgraded heavy-duty brakes with plug and play ABS system
•    Large  vented rotors (358mm) and dual piston calipers for optimal braking power, and optimal cooling
•    Ideal on and off road stopping power for vehicles equipped with larger wheels and tires
•    Spicer 9.75” (248mm) ring and pinion inside
•    3.5” outside diameter/.390” wall thickness axle tubes
•    Heavy Duty 8 X 6.5” wheel bolt pattern
•    Nodular iron diff cover
•    4.88 Gear ratio

The Dana 60 Ultimate rear axle 4.88 comes equipped with steel axle shafts which are instrumental when it comes to travels and expeditions in the Off Road pathways. It can withstand and provide power for the rocky and mud patches to ensure the strength of the vehicle is kept constant. The U-joints that come with the Dana 60 Ultimate front axle 5.38 are structured to provide optimal operational capacity for lifted cars that have been customized with larger wheels and increased ground clearance. NOTE: THIS AXLE CONTAINS THE ARB AIR LOCKER

The Dana 60 Ultimate rear axle 5.38 comes equipped with steel axle shafts which are instrumental when it comes to travels and expeditions in the Off Road pathways. It can withstand and provide power for the rocky and mud patches to ensure the strength of the vehicle is kept constant. The U-joints that come with the Dana 60 Ultimate front axle 5.38 are structured to provide optimal operational capacity for lifted cars that have been customized with larger wheels and increased ground clearance. NOTE: THIS AXLE CONTAINS THE ARB AIR LOCKER

[1] 1350 2" X .120 Wall Rock Crawler CV Driveshaft with Spicer Solid U-joints, and a flange on it that fits your front end so it is easier to install and you do not have to worry about the front crush sleeve. Lifetime Warranty if you twist our Tube or break a Weld.

[1] 2 1/2" X .95 Wall Heavy Duty 1350 CV Driveshaft with Spicer Solid U-joints.

[1] American Made Front 1350 Transfer Case Output Shaft Yoke.

[1] American Made 1350 Rear Transfer Case Output Shaft Yoke.

[1] American Made 1350 Rear Dana 44 Pinion Yoke.

[1] Set of 1350 U-bolts

[1] Set of Grade 10 CV Bolts. 

NEED MEASUREMENT

 

***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

Adams Driveshafts are tailored to provide owners with a strong driveshaft to handle more power, larger tires, and aggressive trails. The 1350 Rear Rock Crawler CV Driveshafts are fabricated using high-grade materials and are thoroughly tested on all different types of terrains. The construction consists of 2 1/2” X .095 Wall Tubing and comes supplied with new CV bolts. This is a perfect addition for any serious off-road build and meets the high demands of owners who will put their vehicles through rugged trails. 

If you’re looking for the ultimate driveshaft for your vehicle, you can trust a product from Adams Driveshafts. With 40 years of experience, they deliver a driveshaft that is a well-balanced component that makes for a great addition to your vehicle. 

Looking for a video to help with installation? It is right here. 

Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand miles

Keep your vehicle in top condition with help from this left hand side parking brake cable and all that it offers.

Notes

Sold Individually.

This is only the Left Hand Cable, make sure to order the Right Hand Cable.

For use when installing Ultimate Dana 60 rear in Wrangler JK.

For Wrangler JL and Gladiator JT use this e-brake cable and extension e-brake cable hardware.

Crown Performance Brake Lines

 

The Crown Automotive Spicer Stainless Steel Brake Line Kit has been designed to improve the braking performance of your vehicle. Stainless steel brake lines will not expand under pressure or heat, which means you will have better pedal response, and better braking performance with decreased stopping distances.

 

The Crown Automotive Spicer Stainless Steel Brake Lines are compliant with most brake fluids, and come provided with washers, and brackets to make for a ready installation.

 

These are made for the Dana Ultimate 60's ONLY

More Crown Performance Brake Lines

 

Dana Spicer E-Locker Harness Features:

Quality Tested And Designed

Vehicle Specific Fitment

Works With Vehicles with Eaton E-locker equipped axles

1-Year Limited Warranty

Innovative Product With Vehicle Specific Design Be sure to add this ultimate Dana 44 / Dana 60 Eaton E-locker wiring harness to your build. How this product works is that The wiring harness goes from the locker, to a provided relay, and up to a provided switch.  The folks at Dana also make sure to put this harness through rigorous design and testing before they make it available to consumers so you know you are getting a quality product. Please be sure to double check the fitment below to ensure you are getting what you need for your build.

Fitment:

Jeep Wrangler Rubicon JK or JKU with Eaton E-lockers

Vehicles with Eaton E-locker equipped axles

Ultimate Dana 44 axles with the Eaton E-locker option

Ultimate Dana 60 axles with the Eaton E-locker option

With tire and wheel technologies growing as fast as their sizes, it's no surprise that beadlock wheels would need to grow, too. Method Race Wheels MR105 beadlock matte black wheels range in size from 17 to 20 in. to reign in even the largest production off-road tires. These extremely durable, yet lightweight cast aluminum wheels feature a one-piece main body with forged 6061 beadlock rings and zinc plated Grade 8 bolts. They have wide center sections, 12 spokes with cast-in gussets for uniform strength, and branded center caps. The MR105 wheels are TPMS-compatible. Hardcore rock crawlers, extreme trail runners, and racers will all find Method Race Wheels MR105 beadlock matte black wheels to be as awesome as they look.

More Beadlock Wheels

The Mopar Parking Brake Cable is a genuine OEM Mopar component that meets or exceeds the demands of today’s high standards for replacement components. This is available for those of you who may have damaged a cable from the trail, or if you have a worn out unit. Additionally, this parking brake is for the rear disk parking brake assembly.

Notes

Sold individually.

This is only the Right Hand Cable, make sure to order the Left Hand Cable.

For use when installing Ultimate Dana 60 rear in Wrangler JK.

For Wrangler JL and Gladiator JT use this e-brake cable and extension e-brake cable hardware.