- Coilover Kits
- Bar Pin Eliminators & Adapters
- Shock Mounts & Brackets
- Shock Parts, Tools And Accessories
- Shop All
- Front Bumpers
- Front Bumper Accessories
- Rear Bumpers
- Rear Bumper Accessories
- Winch Plates
- Vacuum Pump Relocation
- Shop All
- Rockers & Sliders
- Skid Plates
- Body Armor
- Drivetrain Protection
- Steps & Foot Pegs
- Evap Relocation
- Shop All
- Complete Racks
- Fuel/water Tanks
- Fuel/water Tank Mounts & Accessories
- Rack Accessories
- Rack Mounts & Brackets
- Storage Bags
- Shop All
- Differential Replacement Parts
- Diff Covers
- Diff Install/overhaul Kits
- Ring & Pinions
- Shop All
- Auxiliary Lights
- Light Bars
- Fog/driving Lights
- Underhood/rock Lights
- 3rd Brake Light Solutions
- Back Up Lights
- Other Auxiliary Lighting
- Shop All
- Light Mounts & Brackets
- Windshield Light Mounts
- A-pillar Light Mounts
- Fog/driving Light Mounts
- Rear Accessory Light Mounts
- Grill/bumper Light Mounts
- Hood Light Mounts
- Shop All
- Refrigeration & Coolers
- Overhead Storage
- Console Security & Storage
- Rear Cargo Storage
- Underseat Lock Boxes
- Glovebox Organizers & Boxes
- Shop All
- Cat-back Exhausts
- Axle Back/mufflers
- Y Pipes/loop Deletes
- Exhaust Spacers
- Catalytic Converters
- Shop All
We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
Features & Product Details
The Crawler Conceptz Ultra Series Front Bumper has been designed to be a high clearance stubby bumper that will provide the vehicle with better approach angles and better tire clearance.This front bumper has been CNC cut and formed from 3/16” steel and features interior gusseting and through-welded and angled ¾” shackle tabs to endure the most extreme of angle recoveries.
The Ultra Series Front Bumper is an easy bolt-on installation method that comes in a bare metal finish to provide users with the option to paint match or powder-coat to their liking.
With its sloping design and shallow depth, this Skinny Series front bumper boasts an unparalleled approach angle.
Its 3/16-inch steel body usually offers the utmost needed strength to effortlessly crawl even the toughest trails. The stout ¾-inch optional bull bar and shackle tabs offer the maximum strength needed to get right back out again.
The Skinny Series front bumper usually provides a flat top, and is pre-drilled to accept the different designs of winch manufacturers. The heavy-duty CNC-cut 3/16-inch steel construction, low front overhang, often maximizes the approach angle for effortless and extreme maneuvering. The series' dual integrated ¾ inch recovery shackles are usually angled to prevent any hang up cases on obstacles.
Its installation generally needs cutting the factory frame rails.
The product's weight Is approximately 50 lbs, so grab this amazing skinny series and you will surely notice something great you have been missing.
The Crawler Conceptz Skinny Series Front Bumper has been designed to provide vehicle with a better approach angle, and to reinforce the front end of the vehicle to endure the toughest of trails. It features a low front overhang to provide maximum clearance for better maneuvering.
The Skinny Series Front Bumper has been fabricated from 3/16” steel, and comes with a flat top with provisions to accept most winch designs.This particular Skinny Series Front Bumper will come in the bare metal finsh to allow users to powder-coat, or paint match to their liking.
This is an updated design of the original Skinny series bumper that has been remarkably designed to build on the strengths of its predecessor. This design keeps the previous shallow depth and sloping design, but now incorporates advanced recesses for original-equipment fog lamps into its 3/16" steel body. Both Skinny Series front bumpers provide a great flat top that is pre-drilled to agree to most winch manufacturer’s designs.
The outstanding features of Skinny Series Bumper include:
• Heavy-duty CNC cut 3/16 inch steel construction for great strength
• Low front overhang that maximizes approach angle for extreme maneuvering
• Integrated recesses that accept OEM or aftermarket fog lam assemblies
• Dual integrated 3/4in recovery shackles that are angled to avoid getting hung up on obstacles
• Proudly handcrafted in the USA
• Uses factory fog lights
The Crawler Conceptz Ultra Series Mid Width Bumper w/Bar and Tabs Front Raw brings together the ruggedness off-roaders love with the easy-to-install, bolt-on package they need. Off-road enthusiasts will notice the wider profile and appreciate the increased savings and tire protection this offers compared to the original Ultra Series bumper.
Designed specifically for the Jeep JK Wrangler, this front bumper originates from a 3/16-inch steel plate that's CNC-cut. With its interior gusseting and its 3/4in shackle tabs angled and through-welded, there's no recovery this bumper won't tackle on the trail. For added winch protection, it also features plate gusseting and a bull bar.
This versatile bumper allows for both factory standard and aftermarket driving lights to be fitted thanks to its built-in recesses, as well as for most winch types due to its pre-drilled, dropped winch tray. A Fairlead mount plate is also available to be bought separately. The Ultra Series mid-width is ultra easy to fit onto your Jeep using the bolts provided, so that there are no frame alterations or sway bar motor removal required. Pair it up with the matching Ultra Series Lower Skid for an even more brawny look.
Nonetheless, this original Skinny series bumper integrates recesses for an original equipment fog perfectly lamps into its 3/16-inch steel body. Both of the Skinny Series front bumpers provides a flat top, that is remarkably pre-drilled in order to accept most if not all of winch manufacturers' designs.
Skinny Series at a Glance
Its heavy-duty CNC-cut 3/16-inch steel construction Low front overhang usually maximizes the approach angle for an intense maneuvering and integrated recesses accept OEM or aftermarket fog lamp assemblies. The Dual integrated ¾ inch recovery shackles are usually angled to prevent getting hung up on all or any obstacles.
This awesome product is proudly manufactured in the U.S. Its Installation will require cutting factory frame rails. The Product's weight is approximately 40 lbs.
Get it today and discover its magic.
The ultra-series front bumper is a product from Crawler Conceptz. The stubby bumper made in American that combines all that a wheeler would want into one package that is easy to install. It has a recessed design that is very unique and it allows for fewer blockages by air which in turn allows better cooling.
To handle off angle recoveries it has the following
While on the trail the bull bars will provide superior protection. It has built in recessed design that is meant to accommodate factory or after-market lights. It also has a dropped winch tray that is usually pre-drilled so that it can accommodate popular winch designs.
The Ultra Series has a chiseled design that will offer the buyer a leading class angled approach. It has a simple bolt on design that allows for one to mount fast while making use of the provided hardware. The simple design is in such a way that you do not have to remove the sway bar motor that is found in the Rubicon models. It is also made in such a way that it allows maximum customization.
Features of the Ultra series;
Ultra Series is simply an American-made high-clearance stubby bumper for your Jeep JK Wrangler. It incredibly combines all the features that any hard-core wheeler wants in a one rugged and easy-to-install package. It brings with it unique grille-width design that is great at reducing weight and allows for maximum tire clearance.
It features a CNC-cut from 3/16-inch steel. Ultra Series also brings with it interior gusseting and through-welded, angled 3/4-inch shackle tabs to handle even the most extreme off-angle recoveries. The optional bull bar or stinger, with dual plate, provide superior protection on the trail. The built-in recesses accommodate factory or aftermarket driving lights, while the dropped winch tray is pre-drilled to accommodate most popular winch designs. (Fairlead mounts plate available separately.
EASE OF INSTALLATION
The Crawler Conceptz Ultra Series features a chiseled design that provides class-leading approach angle. It's simple bolt-on design allows for fast mounting using provided hardware and does not need removal of the electronic sway bar motor on Rubicon models. For an even more muscular look, pair Ultra Series with the available Ultra Series Lower Skid. The bumpers ship as bare steel to allow for maximum customization.
Drivers love Crawler Conceptz. They specialize in offering upgrades and products that are better than factory OEM versions. With the Ultra Series Steel Front Bumper attachment, it comes with a bare bar for color matching and drivers won't be disappointed. With an easy to install feature, this stubby bumper is the perfect fit for Jeep Wrangler JK versions to help give drivers the durability they want without the hassle of added weight from a heavy bumper or the need to weld pieces into place.
The CNC laser cut steel bumper measures 3/16" and includes shackle tabs that are angled and through welded with gussets on the interior portion. The bar (bull/stinger version) has gussets on the tube to help with winches and offer maximum protection. This is also noted in the pre-drilling on the winches tray (dropped version), as well as the recesses that are built in and can fit factory OEM lights and aftermarket versions. A mounting plate (Fairlead version) is sold separately. With easy to install features, the bolt on design is perfect for simple mounting and requires no drilling. The sway bar doesn't need to be removed (for Jeep Rubicon versions).
The Ultra Series Lower Skids are an option (additional charge) that drivers may want to consider for increased customizing. As the winch tray is dropped it can help to maintain a better gravitational center. With the bolt on application it can also work in conjunction with factory OEM crash bars.
Please note: Bumpers will arrive as unpainted and bare for color matching. Total weight is 56-pounds. All parts are made in the United States.
Its 3/16-inch steel body usually offers the utmost needed strength to effortlessly crawl even the toughest trails. The stout 3/4-inch optional bull bar and shackle tabs offer the maximum strength needed to get right back out again.
The Skinny Series front bumper usually provides a flat top, and is pre-drilled to accept the different designs of winch manufacturers. The heavy-duty CNC-cut 3/16-inch steel construction Low front overhang often maximizes the approach angle for an effortless and extreme maneuvering. The series' Dual integrated ¾ inch recovery shackles are usually angled to prevent any hung up cases on obstacles.
Its installation generally needs cutting the factory frame rails.
The Product's weight Is approximately 50 lbs. grab this amazing skinny series and you will surely notice something great you have been missing. For sure, you will not regret having it.
Drivers ready for their next off road adventure will appreciate the ready to install products that come with Crawler Conceptz designs. Details go into all their products as they specialize in creating upgrades for Jeep Wranglers that will help replace OEM factory parts with sturdier versions ready for the harsh 4x4 terrains and off road conditions.
For the perfect bumper ready to hit the hard trails, drivers shop for the Crawler Conceptz Ultra Series Mid Width Front Bumper w/Recessed Winch Mount, Bar and Tabs. Made for Jeep Wrangler JK versions, this mid width version helps to offer high clearance for hard core driving conditions. It includes a ready to install packaging that is shipped raw for maximum customization options.
Great features include the Crawler Conceptz winch mounting design with its gussets (interior) that helps to offer more cooling with increased air flow. Made in the U.S.A., the winch mount also has shackle tabs that measure .75" and are angled to help give additional support and better angling recoveries from different aspects. The front bumper (Ultra Series) is also made from CNC laser cut 3/16" solid steel. Offering a higher degree of protection, drivers will appreciate the bar or stinger (optional). With specialized built in designs, there are recessed areas for the after market lights (driving) and a winch tray that is dropped and will easily allow for a lot of different winch type versions.
Easy to install, the design of the Crawler Conceptz Front Bumper has a bolt-on feature that makes it easy to attach. All hardware is included and there is no need to move the sway bar, (for Jeep Rubicon versions). There is also an Ultra Series Mid With Front Bumper with a Recessed Winch Mounting that has a lower skid available and sold separately. It will also work with the crash bar, factory OEM version. All parts are made in the United States.
The unique grille-width design that this incredible series brings with it perfectly reduces weight. It also allows for maximum tire clearance. CNC-cut from 3/16 - inch steel, this Ultra Series features an interior gusseting and through-welded, angled 3/4in shackle tabs to take care of even the highly extreme off-angle recoveries. The Built-in recesses usually accommodate factory or aftermarket driving lights, while the dropped winch tray is pre-drilled to handle the most popular winch designs - a Fairlead mount plate is readily available separately.
EASE OF INSTALLATION Crawler Conceptz Ultra Series features a chiseled design that offers class-leading approach angle. Its' simple bolt-on design allows for fast mounting using the provided hardware. It does not need removal of the electronic sway bar motor on Rubicon models. The Bumpers ship is as bare as steel in order to allow for maximum customization.
Off road drivers love Crawler Conceptz, as they offer the best in upgrades that are better than factory OEM versions and more durable than the competition. Made specifically for Jeep Wrangler, the Crawler Conceptz Ultra Series Mid Width Bumper (front version), comes with bare tabs and is designed for hard core off road adventures. With a bolt on style, and easy to install features, drivers won't be disappointed.
The mid wide bumper is designed to give a larger and wider coverage area for the wheels protection. It's just the right size to not add on excess weight and make it a gas guzzler. Designed from CNC laser cut steel, it measures 3/16" and includes shackle tabs that are bare, angled and through welded with gussets on the interior portion. The bar and plate (bull version with gussets) offers the maximum protection for winch pulls in all kinds of terrains.
Great features drivers will appreciate include the pre drilled winch tray and recesses that are built in. A mounting plate can be purchased separately. For ease in installation, the Crawler Conceptz parts are bolt on and there's no need to make modifications to factory OEM parts. Crawler Conceptz also gives their bumpers bolts that will easily fit with the frame horn (preexisting) to help with installation. The driver also won't have to worry about removing the sway bar (for Jeep Rubicon versions). With the Ultra Series, the steel CNC laser cut design can help to give better balance and bumpers ship bare to allow drivers to color match. Total weight is 58-pounds.
Give your off-road Jeep vehicle a new look when you add the Crawler Conceptz Skinny Series Front Bumper w/Fogs and Tabs Bar to the front of the vehicle. The recessed lights in the front bumper provide additional lighting down the road while protecting the lens from damage by rocks and debris.
The Skinny Series flat top allows you to attach a winch to the bumper.The Crawler Conceptz Skinny Series Front Bumper w/Fogs and Tabs Bar is made of 3/16 inch CNC cut steel construction along with aftermarket fog lamp assemblies. The front bumper also includes 3/4 inch dual integrated recovery shackles that help to keep you from getting caught up on branches and road debris. Installing the front bumper requires some basic cutting and fabrication of the factory frame rails.
The Ultra Series mid-width bumper by Crawler Conceptz features the stinger and tabs for those times when having a winch on the adventurous trails would be helpful, or when hard hitting action requires just a bit more protection. With a marginally wider profile, the Ultra Series mid-width bumper provides that extra tire protection that makes a big difference on the trails. Designed from CNC-cut 3/16-inch steel, the mid-width bumper showcases the angled 3/4in shackle tabs and interior gusseting to pull off the worst and most gruesome in recoveries. Stay up top with the built-in recesses made for factory or after-market driving lights, and a pre-drilled dropped in winch tray. Installing the Ultra Series mid-width bumper by Crawler Concetz is a breeze with it's out of the box bolt on capabilities. There are no worries about modifying your frame or finding new hardware (included). The Ultra Series mid-width bumper by Crawler Concetz worked over with the winch encourages trail mates to meet hard situations just to experience the dirt and grime.
Take your Ultra Series mid-width bumper to the next level with the optional Crawler Conceptz winch fairlead mount. It's durable, sharp, and a monster behind the scenes in protecting the bumper.
The Crawler Conceptz Ultra Series Full-Width Front Bumper has been designed to provide vehicles with protection, style, with added clearance all in a bolt-on package.The design also protects the tires, as well as suspension components from harmful elements on the trail with 1/8” gusseted-steel construction and a built-in lower skid plate.
With the Ultra Series Full Width Bumper, users will have enough clearance to crawl with 37” tires with an appropriate lift, and the bumper has recessed fog light provisions to provide the user with extra lighting surface coverage with the light of their choice.
The Ultra Series Full Width Front Bumper is a 100% bolt on installation, and will come in a bare metal finish to provide users with the option to paint-match, or powder coat to their liking.
The Crawler Conceptz Ultra Series Front Bumper has been designed to be a high-clearance, stubby front bumper designed to be a simple installation, while allowing enough room to run large tires while crawling.The Ultra Series Front Bumper has been CNC-cut from 3/16” plate steel, and features interior gusseting and through-welded angled ¾” shackle tabs to handle even the most extreme of angle recoveries.
The Ultra Series Front Bumper is a 100% bolt on installation, and will come in a bare metal finish to provide users with the option to paint-match, or powder coat to their liking.
This Skinny Series rear bumper's angular and low-profile form normally provides class-leading and top-notch ground clearance as well as departure angle. Its body-width 3/16-inch steel design simply means that there is no annoying or irritating overhang to create any hitches on trail obstacles.
Here are some of the great features this skinny series brings with it:
• It has boasts a heavy-duty CNC-cut 3/16-inch steel construction
• It low-profile design normally maximizes departure angles for extreme maneuvering
• it has a dual integrated ¾-inch recovery shackles that are perfectly angled to effectively prevent getting hung up on obstacles
• This product's angular design normally allows your truck to perfectly slide over any rock obstacles
• Proudly manufactured in the USA
• For perfect installation, there is utmost need for FRAME MODIFICATION
• The product weight - 45.00lbs
Easy to assemble, Made in the USA, and solid steel. What more could you ask for in a bumper? The Crawler Conceptz Ultra Series Rear Bumper makes the perfect package as it has a hitch, tire carrier and tabs For the best in bumpers, go with Crawler Conceptz Ultra Series Rear Bumper. It's the perfect package and designed for wheels up to 40 ". Hand welded and precision cut, its 3/16" solid steel and has through welded 1" shackle tabs and interior gusseting. Ready for any terrain, the durable strength can travel over all kinds of rocks and other obstacles. The tow hitch receiver gives added strength with space for the tire to hang in the center, you can add an SII light (LED) available for purchase separately. It also allows for switch activation and easy wiring into the reverse lights.
The Crawler Conceptz Ultra Series II Rear bumper has been designed to provide owners with extra clearance to accommodate up to a 40” tire, and it has an integrated tow receiver hitch.The Ultra Series II rear bumper has been fabricated from hand welded, precision cut 3/16” steel, and features interior gusseting and through-welded angled 1” shackle tabs to withstand the most extreme of pulls.
The design focuses on strength, and the tire-clearance points of the bumper minimizes the probability of hard impacts when descending down a steep ledge, or large rocks. The angled design prevents both the receiver hitch and shackle tabs from getting hung up on tree stumps or rugged trail rocks.
The Ultra Series II Rear Bumper is a simple bolt on installation, and will come in a bare metal finish to allow users to paint-match or powder coat to the color of their choice.
Reducing weight does not necessarily mean that you sacrifice style. The Crawler Conceptz Ultimate Aluminum Bumper offers a contemporary design that is dynamic and clears up 37 inch tire without having to result to a cut out. It is CNC cut and hand welded from the highest quality aluminum. To maintain the functional strength, it has shackle tabs of 3/4inch steel. The recess is notched so as to allow the use of original equipment receiver hitch. To ensure that it slides easily over obstacles it has high clearance and exteriors that are faceted. It is easy to mount the Crawler Conceptz Ultimate Aluminum Bumper using basic tools.
Its features include;
Off-roading enthusiasts will discover that the Crawler Conceptz Ultra Series front and rear fenders are a perfect style that performs phenomenally when there is no more blacktop. If you are looking for a bumper that is just wide enough to wrap around your jeep's fenders, then the mid-width variation of the Ultra Series Rear Bumper is the one you need, with its beveled corners maintaining maximum clearance for rock-hopping. The performance of these fenders is so unlike many of the aftermarket bumpers for the Jeep Wrangler JK and JKU. If you want something more than just a box hanging on the back of your jeep, then consider the Ultra Series. The chiseled surface of the bumper minimizes any possible adverse impact while going down a steep ledge or tall rock. To maximize strength, the shackle tabs, like the receiver hitch, are firmly welded to prevent your jeep from getting snagged on the orneriest of rocks.
In order to endure the most extreme pulls the 1-inch shackle tabs are angled, and the 3/16-inch steel structure is handcrafted and possesses strong interior gusseting. The Ultra Series Mid-Width Rear Bumper is capable of accommodating up to a 40-inch tire. The integrated tow hitch receiver when compared to the factory receiver provides greater strength, has a better style and, most importantly, improved clearance. Included with each purchase of these mid-with bumpers are dual light recesses that accept 2.5-inch LED back-up lights.
The Ultra Series Mid-Width Rear Bumper is mounted easily using hand tools and provided hardware. Another great feature is that Crawler Conceptz products are shipped as bare steel to allow for customization that suits the Jeep's owner. It should be noted that the Ultra Mid-Width Series is not for use with the Ultra Series integrated tire carrier. If you need an integrated tire carrier then you should look into the purchase of the Ultra Series Mid-Width Rear Bumper with Integrated Tire Carrier or add the Ultra Series Body-Mounted Tire Carrier.
So in a nutshell, here are the main features of the Ultra Series Mid-Width Rear Bumper:
• Heavy-duty CNC-cut 3/16-inch steel construction
• Dual integrated 1-inch recovery shackles angled for maximum departure angle
• Proudly maded in the USA
• Easy DIY installation
• Integrated tow hitch receiver
• Faceted surface adds strength and eases sliding over obstacles
• Includes recessed LED back-up lights
• Product weight - 50 lbs
• Ships unfinished for maximum customization options
The amazing Ultra Series Rear Bumper manufactured by Crawler Conceptz is made from US steel. Clears up sufficient space to fit a 40-inch tire thanks to an innovative design of the fully featured Ultra Series Rear Bumper. The 3/16-inch steel Crawler Conceptz hand welded and precision cut rear bumpers are through-welded and feature interior gusseting.
The robust structural strength and multi-faceted exterior aids the Ultra Series Rear Bumper to slide over various trail hurdles and rocks without any effort, while the combined tow receiver hitch provide functional strength and eradicates the factory unit that is low hanging. An SII LED light is accepted by an impeccably placed cut within the spare tire tray, which is made available individually and can either be switch-activated or wired into the reverse lights of the Jeep.
The simplicity of installing the Crawler Conceptz Ultra Series line of goods has become their hallmark. The Ultra Series Rear Bumper is set up within minutes through minimal drilling and using provided hardware and hand tools. Crawler Conceptz products offer ultimate customization options as it gets shipped as bare steel. Note that their goods are not to be used with an Ultra Series integrated tire carrier. Rather contemplate using the Ultra Series Body Mounted Tire Carrier or the Ultra Series Rear Bumper combined with Tire Carrier.
The Crawler Conceptz Ultra Series Full Width Rear Bumper w/Tabs Bare is made from tough steel that was manufactured in the United States. Drivers can clear a tire that measures up to forty inches using the Crawler Conceptz Ultra Series Full Width Rear Bumper w/Tabs Bare. These through-welded bumpers that are made with interior gusseting are cut to precision from very high-quality 3/16-inch steel, making them some of the most solid and effective bumpers that people can find on the market today.
The exterior of the Crawler Conceptz Ultra Series Full Width Rear Bumper w/Tabs Bare adds a great deal of structural strength to any given vehicle, as does the integrated tow hitch receiver. As such, vehicles are better equipped to navigate around trail obstacles and rocks. The Crawler Conceptz Ultra Series Full Width Rear Bumper w/Tabs Bare is great for people who love off-road driving for that reason.The Crawler Conceptz Ultra Series Full Width Rear Bumper w/Tabs Bare is very easy to install, since people will mainly need hand tools, and they will have the Crawler Conceptz Ultra Series Full Width Rear Bumper w/Tabs Bare in place in only a few minutes.
The Crawler Conceptz Ultra Series Full Width Rear Bumper w/Tabs Bare is even equipped with a spare tire tray that makes it easy to install a SII LED backup light.
The mid width variant of the Ultra Series Rear Bumper is just wide enough to wrap around the vehicle fenders, while its beveled corners maintain maximum rock-hopping clearance. Off-roading enthusiasts running aftermarket fenders like the Crawler Conceptz Ultra Series front and rear fenders will find this mid-width bumper’s design a perfect match for style that performs when the blacktop ends. The precision-cut, hand-welded 3/16-inch steel structure boasts interior gusseting and through-welded angled 1-inch shackle tabs to withstand even the most extreme pulls. The Ultra Series Mid-Width Rear Bumper will accommodate up to a 40-inch tire, and the integrated tow receiver hitch affords strength, style and most importantly, improved clearance over the factory receiver. The dual light recesses accept 2.5-inch LED back-up lights.
STYLE THAT PERFORMS
Unlike so many aftermarket bumpers for the Jeep Wrangler, the Ultra Series Mid Width Rear Bumper is more than just a steel box hanging behind the Jeep! The bumper’s chiseled surface, especially at the tire-clearance points, minimizes the probability of a bone-jarring impact when descending a steep ledge or tall rock. The one-inch thick shackle tabs, like the built-in receiver hitch, are through-welded for the best possible strength. Their angled design prevents them from getting hung up on even the toughest rock. The Ultra Series Mid Width Rear Bumper mounts easily using hand tools and provided hardware. Crawler Conceptz products ship as bare steel to provide maximum customization options. Not for use with Ultra Series integrated tire carrier. Consider instead the Ultra Series Mid Width Rear Bumper with Integrated Tire Carrier or add the Ultra Series Body Mounted Tire Carrier.
ULTRA SERIES MID-WIDTH REAR BUMPER AT A GLANCE
• Heavy-duty laser cut 3/16-inch steel construction
• Dual integrated 1-inch recovery shackles are angled for maximum departure angle
• Proudly handcrafted in the USA
• Easy DIY installation
• Integrated tow receiver
• Faceted surface adds strength and eases sliding over obstacles
• Product weight - 90 pounds
• Ships Raw
Gen2 X20 Comp Series 10K Winch by Smittybilt are revamped for improved performance, smooth operation and durability. X20 winches have amphibious motors Series Wound 6.6 horse power that provide maximum torque. The X20 is connected to a 3-Stage Planetary Gear System for increased line speed and pulling power. The 500 amp waterproof solenoid pack can be mounted in two different positions. A newly configured controller is included that can be hard wired or used as a wireless. With optimized gear ratios, the X20 has the fastest line speeds. The Gen2 X20 is covered by a Smittybilt Lifetime Warranty.
Pull yourself out of tough situations while off-roading in your Jeep or other vehicle with the Smittybilt Gen2 X20-10K Waterproof Winch. The waterproof winch works in wet or dry climates and can be used on vehicles up to 10,000 lbs. If you are looking for a heavy duty winch that you can depend on, this is the one. Be prepared for any emergency with this durable winch system.
The Smittybilt 10K Waterproof Winch uses a 6.6 horsepower amphibious motor with a Planetary Gear System with 3 stages. The system is operated with a wireless remote control, allowing you to stay out of danger while pulling the vehicle out of trouble. The system also uses a Dynamic Braking System that helps to keep drum temperatures cooler. Using a braided steel wire rope for more strength, this winch weighs 87 lbs and measures 22.3 x 10 x 6 inches.