Teraflex Forged Adjustable Track Bar - Rear

Teraflex Forged Adjustable Track Bar - Rear Features:

HD Forged Adjustable Track Bars are 230% stiffer than factory track bars – making them the strongest track bars on the market

Bolts into factory locations – no cutting or welding required

Rear Track Bar works w/ our Rear Track Bar Brackets (2.5" Lift: 1954776 or 3-6" Lift: 1954777 or 2.5" Spacer Lift: # 1954202)

High-quality, maintenance-free factory-style bushings w/ an additional rate plate for superior handling and responsive control

The Teraflex Forged Adjustable Track Bar is 230% Stiffer than the Factory Unit For proper steering and handling off-road, you are going to want an aftermarket track bar for your Jeep Wrangler JK build. The Teraflex Forged Adjustable Track Bar offers more responsive handling and steering stability for your rear suspension. If you do not think this track bar is worth it, then the super strong construction will prove to you otherwise. This Teraflex adjustable track bar is 230% stiffer than your Wrangler's factory unit which makes this the strongest track bar for this vehicle on the market. The lateral forces that you experience off-road can put a lot of stress on your rear axle. Equip your Wrangler with a rear adjustable track bar built to withstand the abusive side loads and improve handling off-road. For Wranglers with 4-6" of Lift The Teraflex Forged Adjustable Track Bar allows for lateral adjustments to be made with the rear axle to create proper alignment. Not only that, but you will be able to run through the entirety of your suspension travel without interfering with any other components. You will be able to free up some room in your rear suspension for maximized rear right spring clearance. To be used properly, we recommend that you use this adjustable track bar with Wrangler's with 4-6" of lift, preferably with the Alpine RT or Alpine CT Long Arm Suspension Systems. Installation of this track bar is as simple as it gets. It conveniently uses the factory mounting locations and requires no additional cutting or welding to complete the installation.

Fitment: Jeep Wrangler JK