Rock Krawler 3.5 X Factor Long Arm System

The TJ 3.5 X factor Plus Suspension System usually features the revolutionary independent 3 link front end with a track bar. This design has dominated the professional world of rock crawling but at the same time has maintained streetability and precise handling. The upper control arm is usually full length so as to keep caster change to a minimum. The front upper bushing that is found on the differential is usually replaced with a ball joint to offer maximum articulation. The system usually features a triangulated 4 link assembly in the rear which allows for removal of the rear track bar to offer great articulation. The lower control arms are usually made of 2 inch solid alloy steel and make use of a Monster bushing at the frame connection and a Monster Krawler Joint at the axle connection. The lower control arms have a high clearance design so as to maximize ground clearance as well as cross over angles. The modular skid plate design clam shells the frame at both the top and at the bottom and hence no side drill is requires. It has a 3 piece construction hence servicing of the drive line is a snap and usually does not involve suspension and other modifications. The frame rail members can either be bolted in or welded on. A weld in cradle and a tie in system plate that is made from thick laser cut steel so as to add structure to the rear axle. The system will give you excellent highway ride and handling. The lower control arms made from 2 inch solid alloy steel gives you high clearance. It has the revolutionary independent three link front end that gives great flex and control. Gives you climbing ability that none other can give. System has a smooth bottom that is made from 1/4 inch thick steel. It allows for tires that are 33 inches. Comes with a limited lifetime Warranty and can be upgraded.