EVO Manufacturing Rear Dana 44 LCG Bolt-On Coilover Kit w/EVO Spec Coilovers

The LCG Bolt-On Coilover System is the foundation for coilover systems. A far superior performing coilover system is guaranteed because the EVO LCG Bolt-On Coilover kit comes complete with all necessary parts to easily convert from the limited coil and shock system. The EVO LCG Bolt-On Coilover System will set the standard for ease of installation, price and performance with its 12" of usable wheel travel, custom built brackets for the lowest center of gravity and EVO's legendary SPEC valving and spring rates.

The EVO LCG Coilover Kit includes the following attributes:

1. Simple and quick installation;
2. Fully adjustable, LCG 3" - 5" recommended lift height;
3. Minimal Drilling/Cutting required, fully bolt-on;
4. High Clearance design;
5. Retains all factory installed rear exhaust system components;
6. Retains factory installed front and rear swaybars;
7. Kits contain all necessary parts to convert a standard coil spring suspension system into a coilover spring system;
8. Can be used with any long or short arm system;
9. All shocks are King 2.0 Coil-overs w/remote reservoir and built to EVO specificatons and come equipped with proprietary spring rates and valving.

The following parameters are required:

1. Recommended wheel backspacing 3.75 inch or less (smaller backspacing #);
2. Front and Rear Aftermarket Driveshaft Required for 2-door makes and models;
3. Front Aftermarket Driveshaft Required, Rear Recommended for 4-door makes and models