Firestik FireFly CB Antenna w/Tunable Tip

In a glance, the Firestik FireFly CB Antenna offers you a lightweight, easy-tune (bare-hands tunable tip), high performance coil design, and flexible fiberglass tube solution.

Each Firestik FireFly CB Antenna is approximately 40% lighter than the equivalent length of Firestick II antenna. The lighter materials and reduced wind drag of the 'FL' antennas reduces mounting stress by more than 60%. A 4-foot FireFly will easily perform on a mount that is designed for 3-foot or less antennas. At the top of every FL antenna, you will find our patented tunable-tip. Besides making tuning a snap with this antenna, its design broadens the bandwidth and increases its power handling capabilities.

All our FL antennas are compatible with trucks, vans, motorcycles, cars, and ATV's in a single antenna configuration when metallic ground plane is available. Still, they may be used in dual or co-phased configuration on any vehicle made by another type of material. Like all CB antennas, the FL antenna should be fine-tuned (SWR) in their final mounting location.

If you have ever had the pleasure of turning a non-tunable tip antenna tip, then you will definitely appreciate the FL antennas. With them, tuning is as easy as popping off the tip and turning the adjustment screw up or down as needed. Better still, all FL antennas have been proved to exceed the requirement of any CB radio, both new and old. Besides the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features.

To maintain a balance between flexibility and ruggedness, we have used custom blended glass fiber reinforced tube. Each of this is wound with double insulated copper wire to prevent any oxidation and shorted windings often found on non-Firestik antennas. Our tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. The 3/8"-24 threaded base will fit all Firestik mounts and accessories and each antenna is covered with a static reducing, water-tight sleeve containing UV, and pigment stabilizers.

Note that; For the ultimate performance, we recommend that you use one of our Fire-Flex or RoadPal coaxial cables with these antennas.