Comeup Recovery Winch, Seal Gen2 9.5RSI

Comeup Seal Gen2 9.5RS1 Winch is a patented that has a great pulling capacity. It does not overheat the synthetic winch line. The heat is usually caused by friction. The Comeup Seal Gen2 9.5RS1 Winch is known for its reliability and great performance and because of this many people are adopting them worldwide. The industrial manufactures in japan have also use the Comeup Seal Gen2 9.5RS1 Winch. The manufacturers of Comeup Seal Gen2 9.5RS1 Winch have adopted new technology, the Seal Gen2 that will give the user wireless capabilities.

The 12V DC winch can pull up to 9500lb and it will surely surpass your expectations. This heavy duty series is equipped with a switch alters for thermal protection. It has four pin holes that are equally positions and has a steel handle in the shape of letter T. This makes it possible for one to reposition in increments of 90 degrees.

It has an inbuilt signal remote control that is not only two way but also digital and a water proof remote that one can make use of when they want to activate the winch or deactivate it.

It has a synthetic rope that has 12 strands. It is coated so to make sure there is no water absorbed and also to improve the abrasion. The cast is made of tough aluminum that can withstand up to two times the load of the winch. The mechanical brake is outside the drum and this helps in the dispersion of heat and hence it is fit for synthetic rope use. Some its features include;

A motor with 3730 watts

A gear ratio of three stage planetary

Ring gear that is rotating

An automatic brake that is outside the drum that has a full load Cone Brake systems

A steel drum

A digital two way remote control that is wireless and water proof fitted with a thermometric indicator

A synthetic rope that is 10 millimeters by 30.5 millimeters

The mounting is either foot forward or down

It has a matte black powder coating

It weights thirty two kilograms when including the rope