Jaime

Reviews

Jaime has reviewed 2 Product(s).

Delta brake kit install.
JKJV 2 years ago
I installed this brake kit on my jk. Pretty straight forward install as calipers and rotors go. With the install J8 booster and steel braided lines were also done. Braking has been tremendously improved, the only issue is after a short while brake squeal can be heard a lot of the time. The brake pads are modeled after the 14-21 Tundra brake pads so squealing is normal for them. When maintenanced the pads are interchangeable with tundra pads but the rotors are special machined by Teraflex so will have to be source from them.
---
Teraflex Front/Rear Delta Brake Kit, 5x5 Pattern

J8 brake booster install.
JKJV 2 years ago
I installed this in my JK with the intention of adding a big brake kit. To install I had to separate the cylinder from the booster as it would not slide in together, removal of the ABS hydraulic unit was not necessary. If the cylinder isn't installed straight on the rod it will bend the rod or ruin the piston inside the cylinder. 2 steel lines to the unit did have to be rebent to fit the cylinder as it is 1 and 1/4 or 1/2 inches longer than the stock assembly. I bled it by installing the assembly and routing the lines back into the reservoir and using the brake pedal. I did not want to deal with a vice and screwdriver to bench bleed. I did a complete brake overhall with Teraflex Delta brake kit as well as added steel braided lines so overall braking performance increased.
---
Mopar J8 Master Cylinder and Brake Booster

Questions

Answers

Images