Ryan

Reviews

Ryan has reviewed 12 Product(s).

Just enough!
Ryan S 5 months ago
Installed this a while back on my 23 gladiator Rubicon I ended up just installing the 1 inch puck and I’m glad I did. My jeep says just about right for my 35s Install was easy.
---
TeraFlex 1.5in Performance Spacer Leveling Kit No Shock Absorbers

Exactly the look and performance I wanted.
Ryan S 5 months ago
I prefer a subtle look and so I went with 2 of these up at my A pillars. The output is fantastic, I used a go Rhino mount along with the factory auxiliary switches. There’s not much to say it’s a rigid industries light it’s gonna be solid and great quality. I’ve had them well over a year now and they still look great.
---
Rigid Industries SR-Series PRO Spot Midnight Edition 6in

Exactly what it was after
Ryan S 5 months ago
I prefer a subtle look and so I went with this 20 inch single row midnight edition. On my bumper and two of the 6 inch versions up at my pillars. The output is fantastic, I used a rigid mount designed for the factory steel bumper along with the factory auxiliary switches. There’s not much to say it’s a rigid industries light it’s gonna be solid and great quality. I’ve had them well over a year now and they still look great.
---
Rigid Industries SR-Series PRO Midnight Edition 20in

Couple little things to deal with, but absolutely worth it
Ryan S 5 months ago
I wasn’t necessarily in the market for an exhaust. I actually didn’t mind my jeep being very quiet. And then, for some reason, I decided it would be a good idea to try and squeeze every bit of MPG I could out of it. Without changing the way I drive. The turnpikes where I live and where I travel are often 80 miles an hour. First things first I ended up taking a lot of time to get my factory exhaust out in one piece. It is possible on the floor. You just have to jack up just the rear end enough to puzzle the factory exhaust out . If you have aftermarket bed sliders, they could present a problem because this tucks up really high but even with slide engineering beds, sliders, I was able to get it to work just fine using the exhaust mount one notch, lower, still tucks up nicely. So onto the performance a little bit before this, I did the rough country throttle body spacer believe it or not that made a very surprising difference. I actually ordered that spacer at the same time I ordered the exhaust. I have not noticed any real performance upgrade with the exhaust when it comes to mileage so far around town it improved it just a tiny like less than half a mile per gallon over what I got with the throttle body spacer. I do have a trip coming up and that will give me more comparison for mileage. On the thing that I was worried about the most. I went magnaflow because to my ear they tend to be the better sounding exhaust on most non-V-8. I was really surprised at how good this sounded. I’ve listened to the YouTube clips with Bose headphones on or through my Sonos arc system. It sounds so much better in person overall I’m super happy with the purchase. I would absolutely recommend it if you are in the market for an exhaust.
---
Magnaflow Overland Series Cat-Back Performance Exhaust System

I know I know it doesn’t do anything….
Ryan S 5 months ago
OK , I really debated writing this review. No, I didn’t buy my Gladiator for mileage but that doesn’t mean I don’t want all the mileage I can possibly get. I know ECU right? yeah yeah yeah I understand. I did not expect much from this. I have a gladiator Rubicon 1 inch level on 35s they are Mickey Thompson Baja Boss ATs. I typically sit around 13.5 MPG average. I drive a lot between OKC and Dallas. The only thing I’ve done “performance “ wise is a KNN replacement filter. That made no difference. I really thought this was going to be the same. It is not. Without changing the way I drive whatsoever I’m sitting at 15.6 MPG average and I’ve driven about 500 miles or so with it on. The drivability, the throttle response is significantly better. Look I know man I get it, You’re thinking there’s no way, I would be too. I feel like I’m taking crazy pills because there’s gotta be something I’m missing. I bought this during the summer sale so it was like 39 bucks, it made a huge difference. I really don’t know what else to say. I hadn’t done anything else to the jeep. Actually I put some skid plates on so I added a little weight. I’m not gonna sit here and say you’re gonna get a 2.1 MPG increase, I don’t know what’s going on there but I know this is the only thing that’s changed, what you should expect would be the improved drivability. It is just much smoother.
---
Rough Country Throttle Body Spacer

Finally got the right one for my 23 gladiator!
Ryan S 5 months ago
I’m trying to keep my gladiator as low as possible so I definitely wanted some protection. These seem to fit the bill. The installation wasn’t bad just took a few minutes.
---
Rancho Performance Rock Gear Front Differential Glide Plate

Finish it off
Ryan S 5 months ago
I have the step sliders and bed sliders on my JT I had been looking for something to protect my hitch for a while and just decided to keep RSE look going and glad I did this is exactly what I wanted and looks great.
---
Rock-Slide Engineering Rear Hitch Slider

I mean, it’s TeraFlex
Ryan S 6 months ago
This thing is absolutely awesome I leave it on medium. Definitely helps with these Oklahoma roads. I absolutely recommend it. I’m sure the nonadjustable one is great but for me I wanted to have that availability.
---
Teraflex Falcon Nexus EF 2.2 Fast Adjust Steering Stabilizer

Continue the look of the slide steps
Ryan S 6 months ago
After putting on my steps sliders, I wanted to continue that look back and these are perfect for them. They provide more of a step than my factory Rubicon bed sliders did. With the overhang on the gladiator I absolutely believe having a slider back there is great insurance and especially if you don’t have the Rubicon rear sliders, these are a fantastic way to go.
---
Rock-Slide Engineering Rear Rock Sliders

No-brainer
Ryan S 1 year ago
This is a great addition to the step sliders, makes it so much nicer in the dark! it just looks cool when they light up. Installation is easy.
---
Rock Slide Engineering Step Slider Light Kit

I was a little worried!
Ryan S 2 years ago
So we’ve all heard the horror stories of dealing with Oracle….. things don’t work, things don’t fit, wiring is too short…. that absolutely has not been the case here just to clean well done package I do have the LED tail lights. and apparently that makes a difference I don’t know, but I can tell you everything fit and worked very, very well.
---
Oracle Rear Bumper LED Reverse Lights w/ Harness

Subtle but super cool
Ryan S 2 years ago
I saw these before I even got my gladiator and I thought they were cool. The Gen ones definitely had their issues. These however are absolutely flawless. I do have a Rubicon with the LEDs so that’s all I can talk about and I can tell you if you have that these will work great and look even better.
---
Morimoto XB LED DRL Turn Lights, Pair - Smoked

Questions

Answers

Images