Frame Brackets are often on the to do list to support your Jeeps durability and reliability on the trail. We offer a variety of Frame Brackets to suite your suspension and drivetrain needs. 4 link suspensions require new bracketry to center the axle, we offer heavy duty weld on options to get your new suspension up and running. When swapping out your factory axles for a heavy duty replacement, such as a Dana 60, opting for heavy duty frame brackets ensures your bracketry is just as solid as the new axle. Stretching your wheelbase often requires new frame brackets to support the longer control arms thus we offer heavy duty weld on options that can stand up to off-road abuse. We also offer heavy duty Frame Bracket Reinforcements to add incredible durability to the stock frame of your Jeep to better handle extreme off-road conditions.
When you lift your Jeep, the control arm angles shift from their original flat position to much steeper angles. These steep angles lead to issues like bump steer, front-end dive during braking, reduced steering precision, and more. Control Arm Geometry Brackets help by lowering the control arm mounts to restore the original flat angles, significantly improving steering precision, reducing bump steer, and minimizing front-end dive. For those who frequently tackle tough trails, we also offer heavy-duty weld-on Control Arm Mounts. The stock control arm mounts are prone to cracking under stress, making a heavy-duty replacement a smart choice for durability. We also offer a wide selection of Control Arm Mounts for custom suspension such as 4-link suspension, long arms, and more.
The front and rear Track Bar Mounts on your Jeep or 4x4 are prone to cracking and wear during off-road use, which can lead to issues like death wobble and vibrations. Reinforcing or replacing these mounts with heavy-duty brackets ensures they can withstand the rigors of off-road driving. When you lift a Jeep, the track bar angle becomes steeper than the stock flat angle, leading to body roll and poor handling. A Track Bar Relocation Bracket addresses this by raising the axle-side track bar mount, flattening the angle and bringing it closer to the original alignment.'
Smashed steering stabilizers are an all-too-common sight on the trail due to the factory mount placing the stabilizer low on the tie rod. Upgrading the Steering Mounts and Brackets solves this issue by relocating it on top of the tie rod, instead of below. This keeps it safely mounted away from off-road obstacles, guaranteeing you won't have to replace another smashed stabilizer! We also supply Sway Bar Drop Brackets and relocation brackets to ensure proper geometry with modified suspensions.
Whether you're upgrading to a heavy-duty replacement axle or reinforcing your factory axle, strong Axle Brackets from Northridge4x4 provide the strength you need to tackle extreme off-roading with confidence. We offer Axle Brackets for popular axles like Dana 44s and 60s, allowing you to add strength and fine-tune your setup perfectly. Don’t settle for the failure-prone factory axle brackets! Give your Jeep the strength it deserves and ensure it’s up to the task with our selection of heavy-duty Axle Brackets.
When upgrading to a substantial suspension system, it's highly probable that you'll be in the market for robust bump stops that can handle the demands of your enhanced setup. Our carefully curated assortment of Bumpstop Mounts and Cans is specifically tailored to accommodate the requirements of larger suspension systems, ensuring enhanced performance and durability for your off-road endeavors.
Read Less
