RockJock 2.5in Johnny Joint Rod End w/Hardware

For fabricators and suspension system builders. RockJock's Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common Heim joint. The bushings in the Johnny Joint rod ends are made with a high-density, tough 0.88-inch urethane that encases the inner ball. It is a very durable material and is impervious to the weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16 inch thru-bolt hole, and a 2 5/8 inch mounting width. The outer shell is .180 inch DOM tubing, and the retaining washers are heat-treated steel. 9/16 inch greaseable bolt with nut and washers included.