- Auxiliary Lights
- Light Bars
- Fog/driving Lights
- Underhood/rock Lights
- 3rd Brake Light Solutions
- Back Up Lights
- Other Auxiliary Lighting
- Shop All
Stock
Category
Brand
Rating
Price
Stock
Category
Brand
Rating
Price
We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
Search term:
-
Q: Clearance Skull3 years ago
Can I use the stock gasket? And is there plenty of clearance of the rear sway bar?
-
-
0 of
0 people found the
following answer helpful
A: You should have plenty of clearance to fit this diff cover. I would use the RTV for sealing the diff cover.
Northridge Chris @ Northridge4x4 3 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Torque specs pluikens4 years ago
What are the torque specs for the diff cover bolts and fill/drain plugs?
-
-
1 of
3 people found the
following answer helpful
A: torque specs are as follows; 30 ft lbs on the diff cover bolts and 25 ft lbs on the fill plug.
Northridge Chris @ Northridge4x4 4 years ago -
2 of
2 people found the
following answer helpful
A: Spec for a M8 G8.8 is 18.8 ft-lbs. 30 ft-lbs will yield the fastener - DO NOT use 30.
missionale @ -
1 of
1 people found the
following answer helpful
A: At 28 ft-lbs I had 2 bolts brake. We need better information here. Now I have a freaking project. Thanks for nothing. Torque specs are all over the place. 18 to 30 ft lbs.
BK @
-
1 of
3 people found the
following answer helpful