Front Runner Outfitters RSI Double Cab Smart Canopy Load Bar Kit -1165mm

 Clear up precious interior space and still get your adventure gear anywhere with the help of these low-profile, lightweight Front Runner Load Bars for your RSI Double Cab Smart Canopy.

A set of Load Bars used to transport gear on the roof of your RSI Double Cab Smart Canopy. This low-profile solution includes 4 mounting Feet, 2 1165mm Load Bars, installation kit and fitting instructions.

Features:

Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.

Consisting of:

Material Used:

Approximate Installed Weight: 10.56kg (23.28lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicle’s roof.

Shipping Dimensions:

Shipping Weight: