Rock Hard 4x4 Patriot Series Full Width Front Bumper - Black

Rock Hard 4x4 is very proud to offer the heaviest duty and highest quality Full Width front bumper for the Jeep Cherokee XJ 2/4DR and Comanche 1984 - 2001.

We have a special place in our hearts for this front bumper. RH4x4's full width is the top-of-the-line flagship armor upgrade for the XJ and Comanche. It looks as good as it performs and when you see one installed on a stranger's Jeep you want to walk over and touch it. Clean lines, exact fitment, and included features make it the undisputed leader in XJ and Comanche full-width offerings. With so many bolt on options available this is also one of the most versatile bumpers out there!

Not all bumpers can tackle all trails. Sometimes it takes full width, tire covering, fender protecting, 1/4" thick plate steel bumper to survive your toughest adventures. This is that bumper. It's the big kid on the block with a look that's all its own. Bolt on winch mount and brush guard ready and install in minutes - their full width is a healthy dose of bolt on armor that will cure what ails ya'.

Construction

It's one thing to be Made in USA. It's another to be given the time, quality, and craftsmanship only RH4x4 offers. Each front bumper is laser cut from 3/16" center and 1/4" thick outer section steel to live up to its lifetime guarantee and give you precise fitment. It's then bent and formed into its shape, hand welded, and ground down for a look no other manufacturer (overseas or domestic) can offer. Each bumper is then powder coated in house, by hand, individually - so every nook and cranny is protected. The inner structure is a geometry test of gussets and support. We sleep soundly at night knowing RH4x4 customers can play off road, winch recover, tow, and do-all with their armor installed, then rinse and repeat.

Rock Hard Cherokee XJ and Comanche Front Bumpers are made out of 3/16" x 2" x 5 " thick tubing in the center and with outer edges that are made of 1/4" plate.

Features

Rock Hard 4x4's bumper is more than a plate of steel; it's a fully loaded road armor upgrade bolted to the front of your Jeep. With standard included upgrades like double welded recovery shackle tabs and straight to the frame horn mounting - their bumpers scream Premium. Maybe that's why they are such head turners. When you see a RH4x4 front bumper on the trail - you just get it.

This bumper uniquely hugs your frame as closely as possible, giving you maximum approach angle for extreme off-road adventures.

Ease of Installation

It's been known to take longer to uninstall your OEM front bumper than it takes to install RH4x4's front bumper. This is achieved through their unique "DTF" or Direct-to-Frame mounting method. This gives them not only a precise mounting location to your frame horns it also makes for the most secure way to mount your bumper. Plus, unlike overseas produced bumpers with a "one size misfits all" approach, they don't cut any corners when it comes to one of the most important upgrades you can add to your Jeep.

Components

RH4x4 Front Bumpers are very recognizable for two major reasons: owners bragging about how strong it is and it's innovative features that come standard. What makes up a RH4x4 bumper is what makes them so strong.

Available Options:

FITMENT NOTE: Some early XJ models do not have removable lower fender/fender flare. This will require trimming.