SPod BantamX w/Touchscreen, 36in Cables

SPid BantamX w/ Touchscreen Features:

Fully programmable, digital control system

8 circuits rated at 30 amps at 12.5 VDC per circuit

Easily attach accessories

2 controller ports for Ethernet cables

Low voltage cutoff battery protection

50amp auto-resetting circuit breaker

Operates on 12VDC or 24VDC

8-position input terminal block

On-demand wireless software updates/upgrades

Power and Control all of your Accessories The BantamX was designed to save hours of wiring and installation time when you need to install powered accessories to your overland machine. With more options than you can imagine, this Touchscreen 8-circuit control system is the perfect solution for all of your aftermarket electrical accessories. This kit includes 8 circuits rated at 30 amps at 12.5DCV per circuit, allowing you to configure light bars, fog lights, powered coolers, and everything else you need to tackle the outdoors. Better yet, this unit features great protection against overheating, shorting, reverse polarity, and field collapse to provide consistent performance in any situation. Better yet, if you have more than 8 accessories that need to be controlled at the same time, you can chain up to 4 BantamX units together controlled by one touch screen. High-Quality Construction The BantamX was crafted to using premium materials for consistent performance and long-lasting functionality. The durable construction of this unit is paired with a powder-coated steel base with built in hardware to handle bumpy and aggressive terrain. An included silicone gasket for weatherproofing ensure dust and moisture will remain out, so your electronic components will be kept safe from weather and accidental spills. The robust insulated base and cover helps dissipate heat faster so it will be able to handle constant usage and extreme operation. Best of all, this product is backed by a 1-Year Warranty to help keep your investment protected.

Included Hardware:

Powder coated steel base w/ built in hardware

Silicone gasket for weatherproofing

Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement

Universal & vehicle specific mounting options

Robust insulated base and cover

FEATURES AVAILABLE THROUGH sPOD MOBILE APP (Free):

Each switch can be programmed for:

Dimming

Strobe

Flash

Momentary

Switch Linking

On Road and Off Road mode of operation

The following features are only available through the purchase of the Pro-Series mobile App:

Circuit timers

Switch lockout

Initial startup current for each circuit is raised to 65amps for 5 seconds

Program any circuit to be always on while still maintaining fault protection

Option to disable deep sleep mode

Selectable auto restart after circuit shuts down from over current/short

Programmable Current Limiting (in 2amp increments up to 30amps)

Selectable auto restart for current limiting shut down

Selectable “Latch” or “Momentary” actions for inputs

Programmable ignition control for all 8 circuits

Variable strobe function to create custom flash/strobe patterns

EXTERNAL CONTROLLER OPTIONS (not included with system and can only be used in conjunction with an sPOD controller)

Third party switches

Computers

Arduino

Raspberry Pi

Alpine Audio systems KAC-001 head unit controller

Sensors, thermostats, pressure switches, fan controllers & more

Touchscreen Control Panel Benefits:

Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.

Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.

Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.

Increase in switch lifecycle over traditional electromechanical switches.

Touchscreen Control Module Features:

Voltage feedback (vehicles battery/alternator voltage)

Amperage meter for each switch gives you the status of how much current each accessory is drawing

Board temperature feedback (shown on screen)

Customization: legends (3 lines of text)

Automatic backlighting off after 30 minutes of being inactivity

Automatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)

One touch off function

One second hold on off button shuts all circuits down

Automatic system shut down when the touchscreen is unplugged

Backlight dimming

Multiple Source select (One touchscreen can control up to 32 circuits)

Come with its own mounting bracket.

Bluetooth for use in programming the touchscreen. *

Note:The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.