Baxter Performance Cartridge to Spin-On Oil Filter Adapter
JK 2011-2013 3.6L
Features & Product Details
Pentastar Cartridge to Spin-On Oil filter adapter fits 2011-2013 3.2 and 3.6-liter Pentastar engines. Cartridge Filters have no anti-drainback valve. This product provides faster oil pressure at startup by keeping the upper oil system flooded. The adapter contains full flow check valve and unique threaded locking mechanism. Utilizes Schrader valve for oil evacuation when removing spin-on filter. Made and patented in USA.
Application Note: Minor modifications may be needed on some vehicles to attain proper clearance for installation and servicing.
CAUTION: If the stock oil filter cap and oil filter removed, if this bypass valve and support assembly is not present, STOP!
The Oil filter/cooler assembly has been replaced by 2014+ version and will require MS-201-BK Cartridge to Spin-On Oil Filter Adapter.
Vehicle Fitment
Frequently Asked Questions (FAQs)
Q: Will The Baxter Oil Filter Adapter Void My Vehicles Warranty?
A: The Baxter Adapter won’t automatically void your warranty. It’s up to the dealership to prove any aftermarket component caused a warranty-related issue.
Q: How Do You Change Out The Filter on a Baxter Adapter?A: The Baxter Adapter comes with a shrader valve, allowing an air compressor to push air out of the filter, allowing you to simply spin off the filter without any dripping oil!
Q: Should I Use Synthethic Oil, Additives, or Thicker Oil Like 0w30?A: Installing the Baxter Adapter on your vehicle does not require switching to thicker oil like 0W-30, or adding oil additives. Factory recommended oil is perfectly acceptable.
Q: Do I need the Baxter Oil Filter Adapter If My High-Mileage Vehicle has No Problems?A: The Baxter Oil Filter Adapter is designed to prevent dry starts on your vehicle, preventing excessive wear on the engine. This can help increase the longevity of High-Mileage vehicles.
Product Video
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
I've only had the product in my Jeep for a couple of months, so I cannot determine how effective it will be over time, but it did stop the dry start knocking. This is a great remedy for the inherent problem in my Jeep's engine. I did a little modification with two air hoses but really didn't have to. It was a tight area, and I wanted the extra workroom. One problem though (me bad); I did not tighten the adaptor tight enough the first time I put it on and I lost all the oil on its first startup. I learned that one has to bottom out the adaptor till it will not twist anymore.
Northridge shipped it fast and the adapter seems to be solid & well made. This was easy to install (I spent about 15 minutes). It's nice because it gives you a few different options for spin-on filters (depending on how much clearance you have) but it did NOT fix the cold start rattle in my 3.6 jeep. So I spent $400 just to have the ability to use a spin-on filter; I wish I didn't waste that money.
The Baxter Performance Cartridge to Spin-On Oil Filter Adapteris a great investment for your 3.6 pentastar engine! Noticed a huge difference in starting up the car.