Zone Offroad 1 5/8in Transfer Case Drop Kit

Does your 97-02 Jeep Wrangler TJ have a little drive line vibration after installing a lift? This 1-5/8″ transfer case drop kit might just be the answer. This is typically used with 4″ lifts when the stock slip yoke rear driveshaft is used. This system comes with new fasters and lowers the transfer case to reduce the rear driveline angles. This also include a transfer case shifter relocation bracket to re-align the linkage with this drop. Commonly used with Zone Offroad J5408 rear pinion cam locks listed in the accessoreis. The cam locks use the factory axle provisions to rotate the rear pinion to more closely match the drivetrain angle.

Featured Technology & Benefits

1-5/8″ drop.

Detailed & easy to follow instructions.

New bolts are included.

Important Notes!

Typically for use with a stock driveshaft and vehicles with 4″ of lift