Zone Offroad Dana 30 Weld-On Sway Bar Mount

The Zone Offroad Products Weld-On Dana 30 Sway Bar Mounts are available for those who may have purchased, or built a long arm kit that didn't come with new sway bar mounts for t he axle. This is a weld-on axle sway bar mount that moves the OE sway bar mounting location up 2" from the axle which provides enough clearance so that the steering won't have contact with the sway bar mount.

In most aftermarket long arm kits, you will find that the inner tie rod end will hit the passenger side OE sway bar mount at full droop when turning.These sway bar mounts are fabricated from 3/8" solid steel, and a 3/16" support gusset is included.