For the Jeeper Who Wants it All
The boss of all Terflex kits, 6" Alpine RT6 Long Arm Suspension System is engineered for your Jeep Wrangler JK. It tackles any terrain or cruises on the highway with superior ride quality. This kit builds on the already capable Alpine CT (Cross-Trail) Suspension Systems. These systems include all top-of-the-line components. It improves steering response center the axles to optimize vehicle roll center and reduce body roll for unsurpassed handling. Correct steering geometry eliminates front-end shimmy and reinforces the frame. TeraFlex suspension systems provide reduced noise vibration and harshness (NVH). The results are a noticeable ride and handling improvement.
Does NOT include shocks. Recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability.
Includes:
6” Lift Coil Springs
0.5" Lift Coil Spring Spacers
Alpine Long IR Control Arm & Bracket Kit – 8-Arm (3-6” Lift)
HD Forged Adjustable Front Track Bar (0-6” Lift)
HD Forged Adjustable Rear Track Bar (0-6” Lift)
HD Drag Link Flip w/ Track Bar Bracket/Frame Brace Kit (
Front Track Bar Bracket Gusset
Rear Track Bar Axle Bracket Kit (3-6” Lift)
Speedbump & Progressive Bump Stop Ki
1.25” SpeedBump Front Lower Bump Stop Pad Kit
0.75” SpeedBump Rear Lower Bump Stop Strike Pad Kit
12.25” Front Sway Bar Quick Disconnect Kit (6” Lift)
14.75” Rear Sway Bar Link Kit (6” Lift)
26” Front Brake Line Kit
30” Rear Brake Line Kit
Front Brake Line Anchor Kit
Exhaust Spacer Kit
All necessary hardware
RT Long Arm Suspension Systems Features:
HD Drag Link Flip Kit w/ Front Track Bar Drop Bracket & Frame Brace Kit corrects steering geometry, eliminates front end shimmy, and reinforces the frame
Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles
Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm (lower) wall DOM tube for maximum strength
On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation
Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduced NVH compared to other long arm kits
Delivers true Rogue Trail (RT) performance
Dependable performance w/ zero worries
Positive, responsive handling w/ reduced NVH
Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
Maintenance-free IR Bushings improve on- and off-road ride quality and performance
HD Forged Adjustable Front and Rear (4"+) Track Bars and Rear Track Bar Bracket improve steering response
Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
Coil spring retainers prevent the springs from unseating during full suspension travel
Full range of movement for off-road flex and articulation
TeraFlex Limited Lifetime Warranty against defects
Note(s):
Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels – NOT INCLUDED.
Requires driveshaft modifications such as high-Angle Rzeppa CV Driveshafts or our High-Angle Rzeppa CV Joint Kit (# 1744014).
Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
Requires cutting and welding.
Alignment required.
Requires longer shocks (NOT INCLUDED in base kit) – Falcon Performance Shocks recommended.
Install Time: 24 Hours
