Teraflex Forged ST Rear Sway Bar Kit - 1.5in+ Lift

Stability and Protection

Teraflex Rear Forged ST (Street & Trail) Sway Bar Kit increases 16 inches of rear wheel travel on your Jeep Gladiator JT.  More rear suspension travel than the axle-mounted factory sway bar improves handling and stability on streets and trails. By relocating the sway bar, you prevent damage to the suspension and sway bar.

Features:

Allows for up to 16" of wheel travel

Relocates the sway bar from the axle to the frame to prevent damage to the sway bar

Provides same stability as factory rear sway bar

Requires a minimum of 2” rear bump stop

Sport/Overland fenders and Rubicon fenders require 2.5” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims to fit 35 tires and 37” tires, respectively.

Forged and heat-treated 4140 Rear Sway Bar w/ hex head design

Features curved Forged Sway Bar Arms for clearance through full suspension movement

OEM-style Teflon-coated Sway Bar Bushings for reduced noise and long life

Includes Rear Sway Bar Links, Frame Mounting Brackets, and extruded aluminum Axle Mounting Brackets

 

Includes:

Forged ST Sway Bar – Rear

Forged Sway Bar Arms – Rear – pair

Rear Sway Bar Links – pair

Sway Bar Bushings

Frame Mounting Brackets – pair

Axle Mounting Brackets – pair

All necessary hardware

 

Max Tire Diameter:
JT Gladiator (pickup) w/ 1.5”+ Rear Lift

Sport/Overland Fenders: 35” (2.5” rear bump stops)

Rubicon Fenders: 37” (2.5” rear bump stops)

Note:

Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1057000) for stock wheels – NOT INCLUDED.

May require additional components including JT: Extended-Travel Shock Accessory Kit (# 4834100) Rear Upper Control Arm Extended-Travel Axle Bracket Kit (# 1938225), Rear Forged ST Sway Bar Kit (# 1774700), 1.5” Rear Driveline Center Support Mount Lowering Spacer Kit (# 4801000), Rear Upper & Rear Lower Coil Spring Retainer Kit (# 4954000), and Rear Brake Line Anchor Kit (# 1101455).

Does NOT work w/ the 13” Rear Sway Bar Link Kit w/ Swivel Stud (# 1774300).

Sport/Overland fenders and Rubicon fenders require 2.5” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims to fit 35 tires and 37” tires, respectively.