Get the smoothest-riding, best-handling Jeep JK Lift Kit on the market with Rough Country’s 3.5in Control Arm Drop Kit! This all-inclusive kit comes with everything you need for a total transformation of your Jeep that promotes impressive drivability and a smooth on or off-road ride quality!
This kit features a set of front and rear lifted coil springs that offer enough ground clearance to run 35x12.50 tires and Rough Country’s premium V2 Shocks for a silky-smooth ride. This kit also features control arm drop brackets, engineered to relocate your factory control arms to the optimum geometry for incredible handling and drivability you won’t find in other setups.
Includes Rough Country’s Lifetime Replacement Guarantee!
Features
Easy bolt-on installation
Increased ground clearance
Control arm drop brackets promote optimum geometry for smooth handling & ride quality
Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently.
Factory tuned coil springs are based on the stock spring rate
Notes - Important
Does NOT fit 2-door models.
2012-2018 models require exhaust modifications to clear the front driveshaft. (#1030)
On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.