J.E. Reel 1310 Heavy Duty Rear M/T Driveshaft

1310 Heavy Duty rear driveshaft for 2 door Jeep Wrangler JL models with a manual transmission.

Replacement Driveline. This System is stronger than O.E. type applications recommended for stock to 4½" lift & up to 35” tires for mild use. *2 door with 4½" lift are recommended to use 1350 rear driveline. J.E. Reel Drivelines are designed to work with 2½” & 4½” lifts from most lift manufacturers. Lifts higher than 4½" or long arm lifts must be measured for driveline length. It is best to measure all drivelines if possible.

* The purchaser shall be responsible to determine all design and/or specification parameters and the suitability of any product for its intended use.

Note: JL 2018 Powertrain is installed at 9.25°. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This is especially important to consider on the 2018 model JL. Maximum Angle 1310 C.V. Less than 26° and 1350 C.V. Less than 32°.