J.E. Reel 1350 CV Heavy Duty DriveLine Rear MT

1350 Heavy Duty rear driveshaft for 2 door Jeep JK models with a manual transmission.

This system is a stronger than our 1310 style shaft and takes you from a 26* C.V. angle to a 32* C.V. angle.

Lifts higher than 4.5", long arm lifts & any orher than stock rear axle must be measured for driveline length. See our J.E. Reel "Modifying your Vehicle" page for information on how measure your driveline.

Kit Includes :
2.75"x.083 Tubing
1350 U-Joints
Cast U-Bolt Style Yoke
1350 U-bolts
Forged T/C Flange
Grade 8 Hardware
Installation Instructions

Requirements:
Dana 44 rear axle for bolt on application