Rock Krawler 4.5in X Factor Coil Over Lift Kit
JT 3.6L
Product Resources
Features & Product Details
The Rock Krawler JT 4.5 inch X Factor Mid Arm Coil Over System was specifically designed for those who want a front coilover set-up, maximum articulation from a mid-arm kit and the durability and off-road performance you expect from Rock Krawler Suspension. This system feature a 2.625” remote reservoir coil overs up front and 2.625” remote reservoir shocks in the back.
The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment. Rock Krawler’s industry leading triple rate coils give you 4.5 inches of lift and improves the on-road ride over the factory linear rate springs. All Rock Krawler JT systems includes two rear spring seats, as well as the corresponding two front spring pads. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on-road handling.
System Benefits:
Tire Fitment:
Sport and Overland with Full OEM Fenders
37” Tall Tires (3” Bump Stop Height Recommended)
Sport and Overland with Trimmed or High Lined OEM Fenders
38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
37”/38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
40” Tall Tires (3” Bump Stop Height Recommended)
Wheel Fitment:
Sport and Overland Wheel Fitment Recommendations
37”/38” Tall Tires - Recommend 3.5” of Back Spacing
Rubicon or Sport with Wide Track Axles Fitment Recommendations
37”/38” Tall Tires - Recommend 4.5” of Back Spacing
40” Tall Tires - Recommend 3.5” of Back Spacing
General Notes:
*All lift heights based on Rubicon models
*Designed to maintain 1/2” of rake on Rubicon Models
*As shown valid for OEM axles only
*If so equipped will require removal of rear shutter shock
*Requires aftermarket front drive shaft
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
QUESTIONS & ANSWERS
-
Q: Inner Fenders Schmadam2 years ago
Hi there, I recently ordered this kit and was wondering about what inner fenders I can have on the truck that will work with the coil over buckets in the front. I have a feeling this is a common question, so im hoping to get some good feedback here. Thank you!
-
-
1 of
1 people found the
following answer helpful
A: I would try the Evo 3098V inner fenders. They are the only ones that I know of that are cut for coil overs. Some trimming may still be needed for your specific application.
Northridge Chris @ Northridge4x4 2 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful