EVO Manufacturing 6.5in Enforcer Stage 3 Plus Lift Kit w/ Comp Adjusters
JT
Product Resources
Features & Product Details
The EVO MFG 6.5” Jeep Gladiator JT Enforcer Suspension Systems lift your Jeep Gladiator JT 6.5”s. The JT Enforcer kits are specifically designed and engineered to lift your JT and maintain a performance spring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 6” lift shock or use of the EVO SPEC tuned 2.5” Remote Reservoir King Shocks. These kits come with a set of 4.5” lift springs specific to each corner which will keep the Jeep Gladiator JT level side to side. The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets. When lifting your vehicle your control arms at ride height have a steeper angle towards the floor which can have some negative effect/chop in ride quality. With the use of the included Overland Control Arm brackets, they relocate the front control arm mounting locations at the frame.
In doing this when lifted, they maintain factory flatter control arm angles and while minimal, they alleviate much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also, in the use of Overland Drop Brackets, they are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. Both kits drive very well, the Overland Kits are better suited for less hard off-road crawling and more light off road and on road use. The EVO MFG 6.5" JT Enforcer Kits are easy to install using normal tools. No drilling or cutting. They require no exhaust modifications. Simple Bolt on installation. EVO MFG JT Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation.
The included Enforcer arms are manufactured from large diameter, thick wall DOM Steel Tubing for ultimate in strength and longevity both on and off the trail. These kits require wheel spacers or aftermarket wheels with smaller backspacing and aftermarket front driveshaft. Front and rear adjustable track bars to fine tune axle center are included with PLUS “P” kits. “K” Kits include a set of 4 EVO SPEC Remote Reservoir King Shocks.
Please note that front and rear adjustable track bars to fine tune axle center are included with PLUS “P” kits, and “K” Kits include a set of 4 EVO SPEC Remote Reservoir King Shocks. For 4.5"/6.5" JT Lifts, Front Lower and Rear Upper Adjustable Control Arms and Front & Rear Adjustable Track bars are required for proper alignment/install. These components are included with Stage 3 and Stage 4 "PLUS" Kits.
Wheel spacers or aftermarket wheels with smaller backspacing and aftermarket front driveshaft are required for installation. Exhaust modifications are not required.
Upgrade your Jeep Gladiator JT with the EVO MFG 6.5” Jeep Gladiator JT Enforcer Suspension Systems for better ride quality and performance on and off the trail.
4.5"/6.5" JT Lifts: Front Lower and Rear Upper Adjustable Control Arms and Front & Rear Adjustable Trackbars are required for proper alignment/install. These are included with Stage 3 and Stage 4 "PLUS" Kits.
6.5" Gladiator kits require an aftermarket front driveshaft. Rear aftermarket driveshaft is recommended. One of many manufacturers is JE Reel 3518JLR-24F. Check with manufacturer for compatibility.
Optioned 2.5" EVO SPEC Remote Reservoir King Shocks (both Standard and Adjustable) are Gladiator Mojave Compatible.
EVO-3027B JL/JT Protek Front Shock Relocation Brackets are recommeded with 2.5" King shocks or with all larger aftermarket shock options. (Not Included)
Upgrades: