Teraflex Alpine Short Control Arms Kit, 8-Arm 0-4.5in Lift
JT
Features & Product Details
Upgrade your Suspension
The Alpine Short Control Arm is designed to provide maximum performance on JT Gladiator models with 0-4.5" lifts. It bolts to the factory control arm mounting brackets and provides a full range of movement that will not restrict articulation or flex off-road. The high-quality, dependable, maintenance-free factory-style bushings provide excellent NVH damping and ride quality. Can be added to any existing suspension lift.
Includes:
Alpine Control Arms – Adjustable:
• Front Upper/Lower – pair
• Rear Upper/Lower – pair
Teraflex Alpine Short Control Arms Features:
Control Arm Specs:
Front Upper:
Tube Diameter & Wall = 42mm x 4mm
Factory Length = 20.185"
Min. Length = 20"
Max. Length = 21"
Both Ends = 14mm Bolt
Front Lower:
Tube Diameter & Wall = 42mm x 4mm
Factory Length: 24"
Min. Length: 24"
Max. Length: 25.25"
Both Ends: 16mm Bolt
Rear Upper:
Tube Diameter & Wall = 42mm x 4mm
Factory Length = 16-3/8"
Min. Length = 16-1/8"
Max. Length = 17-3/8"
Both Ends = 16mm Bolt
Rear Lower:
Tube Diameter & Wall = 42mm x 4mm
Factory Length = 23-3/4"
Min. Length = 23-1/2"
Max. Length = 24-3/4"
Both Ends = 16mm
Note: Alignment required.
Product Video
Specifications
REVIEWS & CUSTOMER MEDIA
Short of a fixed sized for your lift, this is the best clamping design in my opinion. I've dealt with jam nuts and rusted out ninja lock washers...it's always an absolute pain to torque it down without changing the length itself. This lets you get it adjusted, and then torque down a couple bolts that run perpendicular, so you won't change the position of the control arm itself. The joints are quiet and overall they are beefy control arms that keep everything planted.
Sign In to vote!
QUESTIONS & ANSWERS
-
Q: AEV Correction bracket Aaron2 years ago
Let me rephrase will this work with the correction bracket or would that need to be removed
-
-
1 of
1 people found the
following answer helpful
A: I would remove the correction brackets. No need for them with adjustable arms.
Northridge Chris @ Northridge4x4 2 years agoWas this answer helpful?
Sign In to vote!
-
1 of
1 people found the
following answer helpful
-
Q: Will this work as factory replacement with my AEV Lift with Geometry Correction kit Aaron2 years ago
-
-
0 of
1 people found the
following answer helpful
A: Yes, these control arm set will work for a replacement for the AEV correction brackets and stock arms.
Northridge Chris @ Northridge4x4 2 years agoWas this answer helpful?
Sign In to vote!
-
0 of
1 people found the
following answer helpful