Motobilt Crusher Series Rear Bumper - Bare Steel

Add style, function & durability to the rear of your Jeep Gladiator!

The Motobilt Crusher Rear Bumper for Jeep JT Gladiator is quality constructed from 3/16” high grade steel that is laser cut & precision CNC press brake formed.  One of the highlights Motobilt's rear bumper design is their stylish recessed step which features anti-slip serrations, self-draining cut outs, Four (4) slotted mounting holes for your tag/license plate, a cut out for an optional tag/license plate light wiring (light sold separately).

You will never damage your rear-mounted lights as we have completely recessed & hidden the cube light mounts within the body of the bumper shell. They have included a pair of inset trim plates for the recessed lights. All trim plates are removable so they can be painted a contrasting color, if desired.

Included are Four (4) park sensor cut outs & the all-new bolt-in Park Sensor Mounts for the Jeep Gladiators factory rear park sensors, which are designed to position your park sensors in nearly the stock position, for reliability & performance. You can 100% reuse your factory wiring harness for the rear park sensors & tag/license plate lights. Motobilt have even included zip tie mounts for securing your wiring.

Motobilt's bumper does not reuse the factory tag/license plate lights, rather, we recommend using an aftermarket LED tag/license plate light kit like the optional #LD-PL6 Offroad Only Litedot Tag Light with 6 Foot Dis-connectable Harness.  Splicing of the factory wiring tag/license plate lights is required for this light.

The MB1110 rear bumper also includes a precision designed cut out for your factory trailer 4/7 pin connector, which quickly & securely snaps into place.

The 3/4” thick high grade steel D-Ring mounts are designed to pass through the shell of the bumper & are fully welded both inside & outside. The D-Ring mounts are inline with the frame rails of the vehicle for added structural strength when using as a recovery point while on the trail.  The D-Rings mounts feature a 1" diameter hole for adding heavy duty recovery shackles (sold separately)

The lower portion of the bumper is cut around the factory tow hitch.  Each side of the bumper wraps completely around the corner of the vehicle up to the factory rear fender flares for the ultimate rear corner body protection.  Each side portion is designed to mount to the factory Mopar rear corner frame mounted guard which is available on Rubicon models.  We also offer the #MB1111 Gladiator Rear Corner Frame Mounts as an option to purchase, if your vehicle is not a Rubicon model. The #MB1111 Gladiator Rear Corner Frame Mounts are an upgrade in strength over the factory Rubicon rear corner frame mounts, so if you are looking for the most strength in your rear bumper, then consider adding these optional heavy duty corner mounts.

Each of the American made bumpers are meticulously metal finished, ground, sanded & inspected with pride for a superior level of quality & craftsmanship.

Note: