Clayton Off Road OE Track Bar Bolt Kit

Replace your worn, rusty, broken front lower OE style track bar bolt with Clayton's new OE size track bar bolt kit. Keeping your track bar tight is key to eliminating front end shimmy or wobbles. This is a simple bolt on solution, replacing the old and weak factory version.

CNC cut flange with welded lock nut provides an OE style flange to tuck into the hidden pocked.

New factory size, 10mm, grade 10.9 torque spec is 75 nm or approximately 55 ft-lbs

Fits

NOTE : This kit uses a Top Lock - it will NOT screw on by hand. Start by hand, then use torque wrench.

Uniquely shaped threads provide a vibration resistant friction fit, so the nut stays put. These all metal locknuts withstand higher temperatures than nylon insert locknuts. Top thread section is deformed to create two or three locking zones; they start easily by hand, then must be wrenched into final position. Grade C equivalent to Grade 8. IFI-100/107 Grade C. ANSI B1.1 UNC or UNF Class 2B thread requirement. Zinc plating, retards the corrosion rate in a normal atmosphere.