Artec Industries Stock Trackbar Bracket Replacement – Front Axle

This heavy bracket is designed to replace the weak factory trackbar bracket on the front 30 and Rubicon 44 axles in the Jeep TJ, LJ, XJ, and ZJ. The factory bracket often has a wallowed out hole allowing axle shifting and is one of the major contributors to the feared DEATH WOBBLE. This bracket replaces the factory bracket for better piece of mind. The 1/4" thick CNC precision cut and formed components of this setup ensure a quality, heavy duty solution.

 NOTE: This bracket is NOT bolt on and requires welding. Cutting off the factory tracbar bracket is required and welding this in it's place.

Joint width is 1.66", so use our Narrow Misalignment Spacers with 7/8" Heims if you are building your own Trackbar.

Features include:

NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.

*Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.