Teraflex Forged Adjustable Trackbar - Front

Teraflex Forged Adjustable Trackbar - Front Features:

HD Forged Adjustable Track Bars are 230% stiffer than factory track bars – making them the strongest track bars on the market

Bolts into factory locations – no cutting or welding required

Front Track Bar works w/ the raised front track bar bracket on our Tera HD Front Axles as well as the Front Track Bar Frame Drop Bracket (Part# 1953000)

High-quality, maintenance-free factory-style bushings w/ an additional rate plate for superior handling and responsive control

Teraflex Forged Adjustable Track Bar Lessens the Burden of Lateral Forces Off-Road During everyday driving on the roads, your front takes the burden of the intense lateral forces that come from making simple turns with your Jeep Wrangler JK. When you are hitting the trails, these lateral forces become more intense and causing your front end to be unstable if your front axle is not equipped with the right parts to handle this abuse. The Teraflex Forged Adjustable Track Bar for your front axle will give you a tremendous upgrade in steering response and handling to combat the abusive side loads you are going to put your Wrangler through off-road. This part works best with Wranglers with 2.5-6" of lift. A proper fit will allow for lateral adjustment of the axle creating proper front axle alignment. Not only that, but you will get improved suspension travel to keep your front axle from interfering with other components. Creates a Stronger and More Stable Front End Suspension The TeraFlex Forged Track Bar has been designed to stabilize the front end. It prohibits any excess movement while improving handling. These have been crafted out of the strongest forged materials, and are 230% stronger than the factory track bar. As a matter of fact, this track bar is the strongest on the market available for your Jeep Wrangler JK. Installation of this easy and all the necessary hardware is included. If you do not have the Tera HD Front Axle, then you can use the Front Track Bar Frame Drop Bracket (Part# 1953000) to make it fit on front axles that are not raised. This is a complete bolt-on component where no alterations are needed on the brackets. This track bar has been designed to have sufficient clearance to allow maximum suspension movement without interfering with other components. To help with the handling and response control, high-quality, maintenance-free factory-style bushings are included that feature an additional rate plate.

Fitment: Jeep Wrangler JK

Important Note: The TeraFlex trackbar works best for those with a 2.5” to 6” lift kit. 

Installation Instructions: CLICK HERE