Select Increments Sono-Pod w/ Kicker Subwoofer and Amplifier Kit

The Sono-Pod is just under 11” tall and specifically designed to fit under security shelves and Insta-trunks as well as maintain some cargo space.  The pod works as a sealed enclosure with an internal volume of .73 cubic feet and can hold most 10” subwoofers, even those with huge magnets requiring mounting depths of up to 8”.  The circular recess where the subwoofer installs is 11” diameter and the pre-cut hole for the sub is just over 9” diameter.  Some subwoofers may require a slightly larger mounting hole, so you may need to make the hole larger with a rotary tool and sanding drum or deburring tool, etc.

The subwoofer fires downward, hovering a couple of inches above the floor, maximizing bass output and offering protection from the elements.  The textured plastic walls of the Sono-Pod are .25” thick making it extremely sturdy and nullifying vibration.  The pod is secured to the floor with special self-drilling screws and black screw caps complete the look.  The pod legs are contoured on the underside to mimic the roll of the carpet over the metal rises in the cargo floor for a precise fit.  The Sono-Pod can integrate into any factory or aftermarket audio system. 

Includes: Sono-Pod, mounting hardware, Kicker 10” 4 ohm subwoofer rated at 300 watts rms, Kicker Mono Amplifier rated at 150 watts rms @ 4-ohms, Kicker Remote Bass Level Controller and 8-gauge amplifier wiring kit.

Note: Some early YJ models have a tailgate stop/stay mechanism along the bottom of the tailgate that will need to be removed to install the Sono-Pod.