Off.Road.Only On Board Air Complete Kit

There are several benefits to having an onboard air supply kit. You can air up your tires after a trail ride to have a safe trip back home. You could use air supply to power your air lockers, or you can use the air to employ small air tools. This is the Off-Road Only On Board Air Supply Kit. This is a complete system that includes everything needed to install an endless supply of engine powered air. 

How this kit works is that an integrated industry exclusive tank will mount to the front of the engine that utilizes a modified clutch that runs directly off the crankshaft balancer pulley without the use of a belt. While the engine is running, the system will automatically cycle the compressor to maintain proper air pressure. An oil removal filter will be included in the kit, and comes with an auto drain that will return the oil back into the compressor. Once you have the air lines routed to your preference, just push them into the provided fittings and they should be ready for use. 

A pair of quick couplers will be included with this kit for each side of the vehicle, along with stainless steel mounting brackets. These will be handy for when you need to power air tools. The mounting brackets have been designed to position the couplers under the dash using the door strap retaining bolts. However please note that the mounting brackets may or may not work with aftermarket roll cage applications depending on the design. 

Here are more specs

·    New Steering Gear that has been modified for cylinder assist

·    New Power Steering Pump with pulley

·    Remote Power Steering Fluid Reservoir with a serviceable filter

·    Steeing Cylinder

·    All steering cylinder mount brackets bolt onto the stock housings and tie rods with the use of a few hand tools. 

·    Brand new heavy duty York compressor with a clutch modified for direct drive and roto-lock fittings

·    Low profile one-gallon steel air tank

·    Braided stainless steel high-temperature Teflon air line

·    High flow brass check valve

·    All aluminum anodized air manifold

·    110 PSI/150 PSI off air pressure switch

·    Adjustable air pressure relief valve

·    10 feet of ¼” and 35 feet of 3/8” nylon tubing plus a tubing cutter

·    Nogren push-to-connect air fittings provided for installation. 

·    Wiring harness, misc fittings, hardware, and cable ties 

​