Synergy Manufacturing Heavy Duty Chromoly 1.5in Tie Rod

Jeep JK Synergy Manufacturing Heavy-Duty 1.5" Tie Rod Features:

Heavy-duty tie rod replacement

Bent similar to factory bar

Allows for easy adjustment without removal

Made from 1 1/2" 4130 chromoly steel

Heat-treated for maximum strength

Two heavy-duty tie rod ends

Castle nut and cotter pin

Grade 8 pinch bolt and hardware

Suspension double adjuster sleeve

Hex-style tube insert

Limited Lifetime Warranty

High-Quality Design & Engineering With over twice the amount of strength than your stock tie rod, the Synergy Manufacturing Heavy-Duty 1.5" Tie Rod for the Jeep JK will keep your off-road warrior moving through any trail. The Synergy Tie Rod is bent similar to the factory bar in order to clear sway bar mounts and other chassis components. Synergy boasts this as the the strongest JK tie rod on the market, so it will be sure to outperform your stock setup. You'll also find that this tie rod easily adjusts without the need for removal, giving you a perfect system for past and future modification you intend to make. For the best clearance, pairing this tie rod with aftermarket wheels with 4.5" of back spacing for consistent performance. Heavy-Duty Construction & Installation Info Constructed from 1 1/2" 4130 chromoly and heat-treated steel that provides the durability needed to tackle just about any application you have in mind. Additionally, this rod is completed with an abrasive-resistant coating that combats the damaging affects of rust and corrosion. For installation sake, this system features a simple bolt-on feature for a trouble-free mounting process without the need for extra modifications to your vehicle. Best o fall, Synergy includes all of the necessary hardware and mounting instructions, and backs this kit with a Limited Lifetime Warranty to help keep your investment protected.

Includes:

(2) Heavy Duty Tie Rod Ends

Castle Nut and Cotter Pin

Heat Treated Chromoly Tie Rod

Grade 8 Pinch Bolt & Hardware

Synergy Double Adjuster Sleeve

Hex-Style Tube Insert

Notes:

Requires use of stabilizer clamp Part Number: 4050-50 or 8007-03 stabilizer relocation kit.

Compatible replacement tie rod ends (4131-L & 4139-L) Both Ends use Left Hand Threaded Joints

Compatible with Reid Racing High Steer Knuckles (JK001R and/or JK001L)

Requires 16" or larger wheel diameter

Min/Max Lengths: Measured in a straight line from zerk fitting to zerk fitting

MAX EXTENDED: 60.4375"

MIN COLLAPSED: 58.188"