Rancho High Steer Knuckles

Rancho High Steer Knuckles Features:

Fits JK Dana 30, JK Rubicon Dana 44

Adds critical strength and height to off-road JK’s

Aligns the geometry of the track bar and drag link to reduce bump steer

Constructed from high-strength steel

Compatible for left- and right-hand drive models

Limited Lifetime Warranty

Requires use of 3-in. track bar mount – (sold separately)

Requires use of a flip drag link – (sold separately)

The Rancho High Steer Knuckles Helps Improve Steering Geometry and Strength Proper steering capability is imperative when trying to navigate difficult off-road trails. The Rancho® High-Steer Knuckles help you maintain steering geometry while adding much needed strength to the most vulnerable points within the steering envelope. These knuckles add an additional 1.5-inches of clearance within the tight space that frees up space for other aftermarket steering components as well a larger wheel and tire combination. The extra space helps to protect your critical steering components from potential damage from driving your Jeep Wrangler JK off-road. Compatible with both Left and Right Hand Drive Models The Rancho High Steer Knuckles features a design that helps lift the steering linkage out of range from direct impact from off-road obstacles or impediments. The High-Steer Knuckles are precisely engineered and heavy-duty for Left Hand and Right Hand Drive models and are best for Jeep Wrangler JK’s 3" or more of lift. For the most precise fit and proper functionality, these knuckles should be used with Wranglers with a Dana 30 or Dana 44 axle. For adding more strength and rigidity to your steering capability, then you have to go with these knuckles from Rancho.

Fitment: Jeep Wrangler JK

Parts Included:

Front left High-Steer Knuckle

Front right High-Steer Knuckle

3-inch bump stops

Important Note:

3-inch Track Bar Relocation Bracket is required and is sold separately if your lift does not have one (RS62101).

A flipped drag link is also required and is sold separately.