The Rock Krawler JL 4.5 X Factor System is the ultimate JL Long Arm system for hard core rock crawling. The Rock Krawler No Limits systems feature our No limits front sway bar links that allow Rubicon owners to utilize the factory Rubicon sway bar disconnect feature and still achieve full articulation. The X Factor systems feature Independent 3 link designs front & rear for maximum articulation and off-road performance.
The rear suspension provides adjustable anti-squat with X2 rear suspension geometry with enhanced rear instant center(s) and rear roll center(s). The new high clearance axle mounts provide 4.5” of ground clearance under the rear axle as compared to stock. The rear upper shock relocation brackets ensure you do not lose any shock or suspension travel. The combination of high clearance mounting and 3 link suspension geometry lets you dominate the trails.
System Benefits
	Excellent Highway Ride
	Improved Off-Road Ability
	Full High Clearance Design
	2.25 RRD Shocks Front & Rear
	Independent 3 Link Long Arm Front Suspension
	Independent 3 Link Long Arm Rear Suspension
	Weld on Long Arm Mounting Brackets with Weld Scheduling just like OEM
	Heat Shield thermal barrier products, just like OEM to protect the front control arm joints at the frame
	4.5” Rear Clearance Gain from the X2 Axle Bracket System
	Adjustable Rear Anti-Squat Featuring X2 Geometry
 
Tire Fitment:
Sport and Sahara with Full OEM Fenders
	38” Tall Tires (4” Bump Stop Height Recommended)
Sport and Sahara with Trimmed or High Lined OEM Fenders
	40” Tall Tires (4” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
	39/40” Tall Tires (4” Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
	42” Tall Tires (4” Bump Stop Height Recommended)
 
Wheel Fitment:
Sport and Sahara Wheel Fitment Recommendations
	38” Tall Tires – Recommend 3.5” of Backspacing
Rubicon Fitment Recommendations
	39” Tall Tires – Recommend 4.0” of Backspacing
	42” Tall Tires – Recommend 3.5” of Backspacing
 
Shock Notes:
	Generic Front Shock Length – 18–19” Collapsed/ 31” Maximum Extended
	Generic Rear Shock Length – 19” Collapsed/ 32” Maximum Extended
 
General Notes:
	*Requires the use of Steersmarts XD Yeti HD Bottom Mount Drag Link for Off-Road Us.
	*XR Package does not require OUR raised rear track bar bracket, the factory axle has a raised rear trackbar bracket, and for OUR systems that do not have a rear trackbar one must be added.
	*All lift heights based on Sport Models.
	*Requires a gas tank conversion either to a JK Gas Tank or any aftermarket gas tank the mounts in the rear or bed of the vehicle.
	*Requires the use of an Aftermarket Front Axle Housing with FAD Delete to Weld the Front Upper Arm Mount to.
	*Recommend a new front C.V. driveshaft for all front shocks with max. extended length greater than 29".
	*Requires welding of the Front and Rear Long Arm Mounts.
	*Requires removal of the OEM frame side lower front and rear control arm mounts.
	*Requires removal of the OEM frame side front and rear upper control arm mounts *Requires removal of the OEM axle side rear lower control arm and track bar mounts. *Requires modifying the OEM rear shock mounts and welding of the raised rear upper shock mounts.
	*Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up.