EVO Manufacturing RHD Drag Link Flip Kit

The Evo Manufacturing Drag Link Flip Kit has been designed to correct the steering geometry on vehicles with 3" of light or higher. The Drag Link Flip Kit will raise the trackbar mounting location by 3" at the axle to help correct the roll center, as well as the steering angles which provides better handling for both on-road and off-road conditions.  An integrated new steering stabilizer location is implemented in the design to allow for more clearance of the tie rod.

This is a complete bolt-on package that will give more strength and reinforcement to the factory front trackbar bracket that is a known to be a weak point. All the provided brackets are fabricated from 3/16" thick laser cut and CNC bent sheet metal, and the draglink itself is forged. The draglink and all bracketry will come powder-coated black to remain corrosion resistant. 

Please note that drilling of the passenger side steering knuckle with 13/16" drill bit is required to complete the installation.