JKS Rear Shock Relocation Bracket 2in

When drivers need parts that are sturdy and reliable, they turn to JKS. JKS specializes in after market Jeep Wrangler products that offer a better fit and help give a more optimal off road experience.

Installation Notes

The JKS Rear Shock Steel Bolt On Relocation Bracket is designed from 1/4 inch steel to give solid support in the mounting bracket. The kit also includes a shock mount that's dual shear with a link mount for the sway bar. The kit also includes a mount skid plate control arm and an easy bolt on installation. Note: Drivers will need to remove the mounts from the factory OEM version axle. Additionally, drives will need to take out the link mounts for the factory OEM control arm and sway bar.

Drivers should obtain 2 inches of additional clearance after the installation. Additionally, they should also receive an additional 2.25 inches with the shock mounts and sway bar mounts will offer an addition 1.75 inches. Drivers should also note that with the move of the lower shock's position, it will change the limits of the vehicle compression and extension as it relates to the suspension. There will be a decrease in the compression if no additional changes are made from the bracket mounting kit. To compensate, drivers may want to change the following: relocate the bump stop. This will help to minimize the bottom out of the shock with compressions. With retainer mounts for the coil springs, they will not be able to retain the coil springs for the rear. Drivers may also need to replace the shocks. This will vary and may depend on the specs of the shocks that drivers have in place.