Revolution Gear M186/M200 Gear Package w/ Master Kits

Revolution Gear and Axle ring and pinion manufactured to be compatible with front Dana 30 reverse rotation differentials for 2007-18 Jeep Wrangler JK and 2018+ Jeep Wrangler JL non-Rubicon models.

Re-gear your Jeep Wrangler with the brand thousands have trusted and elevate your driving experience, whether you're navigating the rugged trails off-road or cruising on the highway. Discover the unmatched benefits of upgrading your Ring and Pinion gear set and understand why it's an essential component in your vehicle.

Key Benefits:

Enhanced Capability and Performance: The optimized gear ratio improves torque delivery to the wheels, allowing for better traction and control. Towing performance is improved when you install the correct gear ratio for your vehicle setup by providing increased torque at lower speeds, making it easier to pull heavy loads without straining the engine. This means smoother, more efficient towing, whether you're hauling a trailer or carrying gear for your next adventure.

Increased Fuel Efficiency at Highway Speeds:Contrary to what one might expect, the right gear ratio can contribute to better fuel efficiency. By optimizing the engine's RPM at highway speeds, the ring and pinion gear set helps maintain a more efficient fuel consumption rate, saving you money and extending your journeys.

Superior Strength and Durability:Revolution Gear and Axle is renowned for their commitment to quality. Our ring and pinion gear sets are made from high grade steel using precision gear cutting and heat treatment processes that meet or exceed Original Equipment standards. This results in a product that not only performs exceptionally but also withstands the rigors of both daily driving and extreme off-road conditions.

Easy Installation and Quiet Operation:With over 40 years of manufacturing experience, Revolution Gear and Axle ring and pinions are preferred by installers for smooth and consistent setup. Our gear sets offer quiet operation, ensuring a comfortable ride without the annoying gear whine often associated with aftermarket gear sets.

Upgrading the Ring and Pinion set by Revolution Gear and Axle is more than just a modification; it's an investment in the performance, efficiency, and enjoyment of your vehicle.

All Revolution Gear and Axle Ring and Pinion gear sets are backed by a 2 Year Warranty against manufacturing defects. With products that have been Street, Off Road and Race proven, you can count on Revolution Gear and Axle products to be the most trusted in the aftermarket.

Specifications:

A: Upgrading to 4.56 gears helps restore lost performance after installing larger tires and enhances torque for off-road use.

A: Yes. These gears help return your Jeep's RPMs to the optimal range, improving acceleration and overall drivability.

A: Yes. For proper function and to prevent drivetrain damage, front and rear axle ratios must match.

A: They may improve fuel efficiency if you're running oversized tires by bringing RPMs back to a more efficient range.

Revolution Gear and Axle ring and pinion manufactured to be compatible with front Dana 30 reverse rotation differentials for 2007-18 Jeep Wrangler JK and 2018+ Jeep Wrangler JL non-Rubicon models.

Re-gear your Jeep Wrangler with the brand thousands have trusted and elevate your driving experience, whether you're navigating the rugged trails off-road or cruising on the highway. Discover the unmatched benefits of upgrading your Ring and Pinion gear set and understand why it's an essential component in your vehicle.

Key Benefits:

Enhanced Capability and Performance: The optimized gear ratio improves torque delivery to the wheels, allowing for better traction and control. Towing performance is improved when you install the correct gear ratio for your vehicle setup by providing increased torque at lower speeds, making it easier to pull heavy loads without straining the engine. This means smoother, more efficient towing, whether you're hauling a trailer or carrying gear for your next adventure.

Increased Fuel Efficiency at Highway Speeds:Contrary to what one might expect, the right gear ratio can contribute to better fuel efficiency. By optimizing the engine's RPM at highway speeds, the ring and pinion gear set helps maintain a more efficient fuel consumption rate, saving you money and extending your journeys.

Superior Strength and Durability:Revolution Gear and Axle is renowned for their commitment to quality. Our ring and pinion gear sets are made from high grade steel using precision gear cutting and heat treatment processes that meet or exceed Original Equipment standards. This results in a product that not only performs exceptionally but also withstands the rigors of both daily driving and extreme off-road conditions.

Easy Installation and Quiet Operation:With over 40 years of manufacturing experience, Revolution Gear and Axle ring and pinions are preferred by installers for smooth and consistent setup. Our gear sets offer quiet operation, ensuring a comfortable ride without the annoying gear whine often associated with aftermarket gear sets.

Upgrading the Ring and Pinion set by Revolution Gear and Axle is more than just a modification; it's an investment in the performance, efficiency, and enjoyment of your vehicle.

All Revolution Gear and Axle Ring and Pinion gear sets are backed by a 2 Year Warranty against manufacturing defects. With products that have been Street, Off Road and Race proven, you can count on Revolution Gear and Axle products to be the most trusted in the aftermarket.

Specifications:

A: Upgrading improves torque, throttle response, and off-road crawling ability, especially when running larger tires.

A: Yes. The lower gear ratio increases torque, making towing and hauling easier, especially with larger tires and added vehicle weight.

A: While RPMs increase slightly at highway speeds, the improved torque and power delivery can help maintain or improve fuel efficiency with larger tires.

Revolution Gear and Axle ring and pinion manufactured to be compatible with front Dana 30 reverse rotation differentials for 2007-18 Jeep Wrangler JK and 2018+ Jeep Wrangler JL non-Rubicon models.

Re-gear your Jeep Wrangler with the brand thousands have trusted and elevate your driving experience, whether you're navigating the rugged trails off-road or cruising on the highway. Discover the unmatched benefits of upgrading your Ring and Pinion gear set and understand why it's an essential component in your vehicle.

Key Benefits:

Enhanced Capability and Performance: The optimized gear ratio improves torque delivery to the wheels, allowing for better traction and control. Towing performance is improved when you install the correct gear ratio for your vehicle setup by providing increased torque at lower speeds, making it easier to pull heavy loads without straining the engine. This means smoother, more efficient towing, whether you're hauling a trailer or carrying gear for your next adventure.

Increased Fuel Efficiency at Highway Speeds:Contrary to what one might expect, the right gear ratio can contribute to better fuel efficiency. By optimizing the engine's RPM at highway speeds, the ring and pinion gear set helps maintain a more efficient fuel consumption rate, saving you money and extending your journeys.

Superior Strength and Durability:Revolution Gear and Axle is renowned for their commitment to quality. Our ring and pinion gear sets are made from high grade steel using precision gear cutting and heat treatment processes that meet or exceed Original Equipment standards. This results in a product that not only performs exceptionally but also withstands the rigors of both daily driving and extreme off-road conditions.

Easy Installation and Quiet Operation:With over 40 years of manufacturing experience, Revolution Gear and Axle ring and pinions are preferred by installers for smooth and consistent setup. Our gear sets offer quiet operation, ensuring a comfortable ride without the annoying gear whine often associated with aftermarket gear sets.

Upgrading the Ring and Pinion set by Revolution Gear and Axle is more than just a modification; it's an investment in the performance, efficiency, and enjoyment of your vehicle.

All Revolution Gear and Axle Ring and Pinion gear sets are backed by a 2 Year Warranty against manufacturing defects. With products that have been Street, Off Road and Race proven, you can count on Revolution Gear and Axle products to be the most trusted in the aftermarket.

Specifications:

A: Absolutely. A 5.13 gear ratio is ideal for JKs running 37-inch tires, helping to restore lost power, improve throttle response, and optimize drivability on and off-road.

A: Upgrading to 5.13 gears improves low-end torque, off-road crawling ability, and overall performance after adding larger tires or additional weight from armor, bumpers, and gear.

A: Yes, recalibrating your speedometer and transmission shift points is necessary after a gear ratio change to ensure accurate readings and proper performance.

A: Definitely. Revolution Gear & Axle uses high-quality, heat-treated 8620 steel in their ring and pinion sets, making them ideal for rock crawling, trail riding, and extreme off-road conditions.

Revolution Gear D35 (200MM) Rear JL gear sets are made from the highest quality steel and are precision heat treated to OEM specifications, making for the best aftermarket gears available. All Revolution Ring and Pinion sets are backed by an industry leading 2 Year Warranty against defects.

Revolution Gear's precisely controlled manufacturing processes create a flawless setup, smooth operation and longer gear life. With products that have been Street, Off Road and Race proven, you can count on Revolution Gear and Axle products to be the most trusted in the aftermarket.

Ring Gear Rotation: Standard

Revolution Gear and Axle ring and pinion manufactured to be compatible with rear Dana 35/200MM differentials for 2018+ Jeep Wrangler JL Non-Rubicon models.

This premium gear set is engineered to elevate your driving experience, whether you're navigating the rugged trails off-road or cruising on the highway. Discover the unmatched benefits of upgrading your Ring and Pinion gear set and understand why it's an essential component in your vehicle.

Key Benefits:

Enhanced Capability and Performance: The optimized gear ratio improves torque delivery to the wheels, allowing for better traction and control. Towing performance is improved when you install the correct gear ratio for your vehicle setup by providing increased torque at lower speeds, making it easier to pull heavy loads without straining the engine. This means smoother, more efficient towing, whether you're hauling a trailer or carrying gear for your next adventure.

Increased Fuel Efficiency at Highway Speeds:Contrary to what one might expect, the right gear ratio can contribute to better fuel efficiency. By optimizing the engine's RPM at highway speeds, the ring and pinion gear set helps maintain a more efficient fuel consumption rate, saving you money and extending your journeys.

Superior Strength and Durability:Revolution Gear and Axle is renowned for their commitment to quality. Our ring and pinion gear sets are made from high grade steel using precision gear cutting and heat treatment processes that meet or exceed Original Equipment standards. This results in a product that not only performs exceptionally but also withstands the rigors of both daily driving and extreme off-road conditions.

Easy Installation and Quiet Operation:With over 40 years of manufacturing experience, Revolution Gear and Axle ring and pinions are preferred by installers for smooth and consistent setup. Our gear sets offer quiet operation, ensuring a comfortable ride without the annoying gear whine often associated with aftermarket gear sets.

Upgrading the Ring and Pinion set by Revolution Gear and Axle is more than just a modification; it's an investment in the performance, efficiency, and enjoyment of your vehicle.

All Revolution Gear and Axle Ring and Pinion gear sets are backed by a 2 Year Warranty against manufacturing defects. With products that have been Street, Off Road and Race proven, you can count on Revolution Gear and Axle products to be the most trusted in the aftermarket.

Specifications:

A: It improves low-end torque, acceleration, and highway efficiency by placing the engine back into its optimal RPM range.

A: Yes. A master install kit replaces worn components like bearings, seals, and shims to ensure a correct and reliable setup.

A: Gear setup requires specialized tools and experience. Professional installation is highly recommended to avoid gear noise and premature wear.

A: It can. After larger tires are installed, 4.56 gears can help improve fuel economy by optimizing engine RPM at cruising speeds.

Revolution Gear and Axle ring and pinion manufactured to be compatible with rear Dana 35/200MM differentials for 2018+ Jeep Wrangler JL Non-Rubicon models.

This premium gear set is engineered to elevate your driving experience, whether you're navigating the rugged trails off-road or cruising on the highway. Discover the unmatched benefits of upgrading your Ring and Pinion gear set and understand why it's an essential component in your vehicle.

Key Benefits:

Enhanced Capability and Performance: The optimized gear ratio improves torque delivery to the wheels, allowing for better traction and control. Towing performance is improved when you install the correct gear ratio for your vehicle setup by providing increased torque at lower speeds, making it easier to pull heavy loads without straining the engine. This means smoother, more efficient towing, whether you're hauling a trailer or carrying gear for your next adventure.

Increased Fuel Efficiency at Highway Speeds:Contrary to what one might expect, the right gear ratio can contribute to better fuel efficiency. By optimizing the engine's RPM at highway speeds, the ring and pinion gear set helps maintain a more efficient fuel consumption rate, saving you money and extending your journeys.

Superior Strength and Durability:Revolution Gear and Axle is renowned for their commitment to quality. Our ring and pinion gear sets are made from high grade steel using precision gear cutting and heat treatment processes that meet or exceed Original Equipment standards. This results in a product that not only performs exceptionally but also withstands the rigors of both daily driving and extreme off-road conditions.

Easy Installation and Quiet Operation:With over 40 years of manufacturing experience, Revolution Gear and Axle ring and pinions are preferred by installers for smooth and consistent setup. Our gear sets offer quiet operation, ensuring a comfortable ride without the annoying gear whine often associated with aftermarket gear sets.

Upgrading the Ring and Pinion set by Revolution Gear and Axle is more than just a modification; it's an investment in the performance, efficiency, and enjoyment of your vehicle.

All Revolution Gear and Axle Ring and Pinion gear sets are backed by a 2 Year Warranty against manufacturing defects. With products that have been Street, Off Road and Race proven, you can count on Revolution Gear and Axle products to be the most trusted in the aftermarket.

Specifications:

A: Regearing to 4.88 restores power and drivability lost from installing larger tires (37 inches). It improves acceleration, fuel efficiency, and performance on and off road.

A: Revolution Gear uses premium-grade 8620 steel, CNC-machined and heat-treated to meet OEM standards for strength, quiet operation, and long-term reliability.

A: Gear installation requires specialized tools and expertise. It’s highly recommended to have this gear set installed by a qualified drivetrain professional.