Name: Synergy Manufacturing Rear Lift Coil Springs - 6in Lift 4-Dr / 7in Lift 2-Dr
Brand: Synergy Manufacturing
SKU: 8864-60
Price: 310 USD
Availability: OutOfStock

JL

★★★★★

()
Write a Review | Q&A

Part # 8864-60

$310.00

Quantity

Out of stockEstimated to ship in 10-15 days

Qualifies for
free shipping!

Set your vehicle to confirm fitment

You will earn Reward Points with this Purchase.

Authorized
Dealer

Product Resources

Installation Instructions

Fitment Details

Features & Product Details

Synergy MFG Jeep JL / JLU Multi-Rate Rear Lift Coil Springs. Synergy MFG has designed these springs from a clean sheet for the new Wrangler platform. All springs are multi-rate and have been designed to make a great platform even better. These springs are unique to the JL and not shared with the JK or other vehicles. Like OEM, their coil springs are unique lengths to account for load differences on each corner of the vehicle. There are right and left specific springs front and rear to guarantee the vehicle will sit level. Multi-rate design has a soft initial rate which prevents the spring from coming loose in the coil tower, even with long travel shocks. The ride rate is slightly stiffer than the OEM springs to account for additional weight from bumpers, winches, skid plates and gear. Springs are proudly manufactured in the United States of the highest quality steel. Springs are designed to be able to set solid (fully collapse) without overstressing the material and are pre-set from the factory meaning the springs will never sag or set.

Fitments:

8864-60

4-Door Lift Height: 6in

2-Door Lift Height: 7in

Spring Rate (Initial/Ride Rate): 120/180 lb/in

Collapsed Length: 8.38

Extended Length: 21.875

Min. Bump Stop Spacing: 2in

Ride Height for Jeep JL Models:

Please note: Measurement is over stock height for that particular model. Lift heights are based off fully loaded Rubicon 3.6L models with HD front and rear bumpers, winch, and full-size spare. Other lift heights posted are estimated based off calculated vehicle weight values. Actual lift height achieved may vary from model to model.

Sport: 2-Dr: 7in / 4-Dr:6in

Rubicon: 2-Dr: 7in / 4-Dr: 6in

Rubicon Diesel: 4in

Non-Rubicon Diesel: 5in

Jeep JL 4XE: 4in

Jeep JL 392: 4in

Features:

Multi-Rate coil springs allow for longer spring lengths and increased travel

Spring rates are only 5-10 percent stiffer than stock for superior ride quality

Coil spring block heights designed around common bump stop spacings to optimize wheel travel

Unique spring lengths for each corner of the vehicle so it will sit level side to side

Frequency balanced and tuned spring rates to maximize suspension performance on and off road

Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance

Sold in pairs

Notes:

Lift heights are based off fully loaded Rubicon 3.6L models. Other models will see more lift.

Coil springs require proper bump stop spacing with Synergy 8057-10 Bump Stop Spacers.

Coil Springs retain the stock rake of the vehicle.

Up to .75 inch of front coil spring spacer can be added to level the vehicle using 8017-075 front coil spring spacers.

Min bump stop spacing listed is the minimum amount of bump stop spacing required to prevent the springs from going into coil bind. Do not use less bump stop spacing.