The Teraflex HD Forged Adjustable Rear Track Bar is 50% Stronger than your Factory Unit Just because you own a Jeep Wrangler JL, does not mean you can test your luck against some of the most challenging trails out there. For proper rear axle strength and off-road handling, you need to incorporate a rear track bar into your Wrangler build. The Teraflex HD Forged Adjustable Rear Track Bar is an adjustable rear track bar that is a whole 50% stronger than your current factory unit. Intense off-road use means abusive side loads and tremendous amounts of lateral force put on your axles. As you are cycling through your suspension travel, you want to make sure you hit full travel without the interference with any other components. Adjustable from 1/2" Shorter to 1" Longer than Stock Length With the lateral adjustments on the Teraflex HD Forged Adjustable Rear Track Bar, you can maintain proper vehicle alignment as you take your Jeep Wrangler JL over challenging terrain. Each rear track bar is adjustable from 0.5" shorter than stock to 1" longer. The adjustable ends feature an improved turn-buckle design with built-on clamp-on and alignment feature. This makes for an easy installation along with simplifying the adjustment process. With this rear track bar on your Wrangler build, the suspension will run so smooth, you start taking it for granted. The OEM-style rubber boots and high-quality, factory-style bushings will give you that smooth ride with superior handling and responsive control. Not only is this a long-lasting investment for your Wrangler build, but will add value to the performance of other key components of your vehicle. When installed, Teraflex's rear adjustable track bar maximizes the exhaust and differential cover clearances to keep them out of harm's way when rock crawling.

Parts Included: HD Forged Adjustable Track Bar – Rear

Fitment: Jeep Wrangler JL

Important Note: The Teraflex Rear HD Forged Adjustable Track Bar is recommended for 2.5-6” lifts. Bolts into factory locations or our Rear Track Bar Axle Bracket (recommended for 2.5”+ lifts) – no cutting or welding required.

Product Resources

Installation Instructions

Customer Reviews (1)

Customer Photos and Videos

Fitment Details

Specifications

Brand: Teraflex

Adjustable: Yes

Color: Black

Location: Rear

Minimum Lift Height Required: 0-6in

Mfgr. Warranty: Limited Lifetime

Condition: New Product

Return Policy:

Standard

PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

REVIEWS & CUSTOMER MEDIA

1 Reviews

5 out of 5 Stars

5 Stars

(1)

4 Stars

(0)

3 Stars

(0)

2 Stars

(0)

1 Stars

(0)

Customer Photos and Videos

Seems very strong and easy to adjust. 2 years ago

5out of 5stars

BDinTX
Before ordering I called Teraflex to make sure these were made in the USA. We have the same ones front and rear in both the JLUR 2.0T and the JLUR 3.0 EcoDiesel. They clear the ARB diff covers front and rear and there are no exhaust clearance issues. Even on the diesel where I confirmed with TF to confirm that the bend still goes on the drivers side. Adjustment can be made with it installed but it is important to torque the clamping collar bolts per their instructions. Basically go back and forth between the two. Tighten one, the other loses clamping force, tighten the other one and the first one loses clamping force, back and forth, etc. Also the bolt head is a 12 point and very snug. I only have one socket that fits it so recommend you ensure have one that fits before beginning install.