Dana 44 AdvanTEK Rear Differential Cover Kit

QUESTIONS & ANSWERS

• Q: Clearance  Skull3 years ago

  Can I use the stock gasket? And is there plenty of clearance of the rear sway bar?
• • 0 of 0 people found the following answer helpful

    A:  You should have plenty of clearance to fit this diff cover. I would use the RTV for sealing the diff cover.

    Northridge Chris @ Northridge4x4 3 years ago  
    Yes  No
    Was this answer helpful?

• Q: Torque specs  pluikens4 years ago

  What are the torque specs for the diff cover bolts and fill/drain plugs?
• • 1 of 3 people found the following answer helpful

    A:  torque specs are as follows; 30 ft lbs on the diff cover bolts and 25 ft lbs on the fill plug.

    Northridge Chris @ Northridge4x4 4 years ago  
    Yes  No
    Was this answer helpful?
  • 2 of 2 people found the following answer helpful

    A:  Spec for a M8 G8.8 is 18.8 ft-lbs. 30 ft-lbs will yield the fastener - DO NOT use 30.

    missionale @
    Yes  No
    Was this answer helpful?
  • 1 of 1 people found the following answer helpful

    A:  At 28 ft-lbs I had 2 bolts brake. We need better information here. Now I have a freaking project. Thanks for nothing. Torque specs are all over the place. 18 to 30 ft lbs.

    BK @
    Yes  No
    Was this answer helpful?