Rock Slide Engineering Step Slider Set w/ Accessory Package

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Rock Slide Engineering’s newly designed 3rd Generation Step Slider is next level. This fully functional, trail rated, rock slider is integrated with a power step for easy access for all demographics. An additional 2 inches on the back end of the step has been added to this generation for better, safer access to the rear door. Our engineers have incorporated smart motor technology and eliminated the gas strut from the internals of the step to increase the motor longevity. This improvement will keep your step deploying and retracting consistently, even in cold and harsh weather. A sleep mode has been built in to minimize battery drainage. The slider provides protection for the rocker panel on your Jeep. The step will deploy a full 12 inches down from the body of the Slider when the door is opened. After closing your door, the step will automatically retract and sit flush with the body of the step slider.

Our Step Slider is made of 10-gauge steel construction. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. The internals of the step slider are made of stainless steel and aluminum to prevent rusting. This plug and play system is designed to utilize the factory mounting points for a no-drill installation. It uses a stand-alone wire harness, so no splicing or rewiring on your Jeep is necessary. This will allow you to retain your manufacturer warranty after installation.

The Step Slider is rated for moderate off-road conditions. More aggressive trails require the additional skid plate for the step slider to provide further stability and protection.

Practical and Stylish Addition

If you're somebody who is constantly on the go, you can easily improve your Jeep's functionality by installing the Rock Slide Engineering Tailgate Table to your rig. This tailgate tabletop is the perfect addition to any Jeep as it serves as a prep table whether you're relaxing by the beach, watching an outdoor sporting event, or camping at your favorite sites. Its innovative design folds perfectly up against the tailgate and can even unfold into a 2-teir workstation for just just about anything you have in mind.

Premium Construction & Warranty Info

Crafted from ultra-tough 12-guage aluminum,this Trial Tailgate Table features impressive durability for any occasion. The hardcore construction of this unit is paired with a durable black powder-coat finish in order to combat corrosion, abrasions, and chipping. In addition, the table is furnished with riveted hinges for easy and smooth operation of the unit. Installation is made simple as this table installs using self tapping screws or button head bolts by attaching to the existing mounting points on your tailgate. All of the necessary hardware and mounting instructions are included. Best of all, Rock Slide Engineering backs this kit with a Lifetime Structural Warranty and a 12-Month Warranty on the finish.

A:  No, it’s designed to allow full tailgate function when installed.

A: For JL Wrangler installations, no drilling is necessary. For JK Wranglers, 6 self-tapping screws are needed to install the table. 

Rock Slide Engineering EZ Rack Basic Kit Allows you to Mount Accessories onto your Spare Tire

Secure Place to Carry an Axe, Jack, Shovel, or Fuel Can

A: A universal steel spare tire mount that enables you to haul gear, fuel cans, or tools by attaching plates and straps to your spare tire carrier.

A: Yes، no drilling required—mounts in about 30 minutes via the tire carrier using the included straps and hardware.

A: Load capacity depends on your tire carrier’s rating. It’s ideal for carrying items like RotopaX, fuel cans, jacks, and shovels.

Rock Slide Engineering has designed the EZ License Plate so you can keep your plate visibility when the stock Jeep bumper is removed. Made from 11-gauge Aluminum. The License plate has an adjustable 2-inch strap that mounts to the tire. You can move and manipulate the plate to what position you want it in. We use a state-of-the-art automated powder coat system to for a textured black topcoat. Easy installation!

Includes

A: Yes, the strong mounting strapes and mounting plate keep the license plate firmly in place, even during off-road driving conditions.

A: It’s constructed from durable, powder-coated steel to withstand weather and trail abuse.

A: Yes, Rock Slide Engineering manufactures this product in the USA. 

Rock Slide Engineering understands when summer time comes around, many of our customers will want to remove their doors and continue to use their steps. Simply unplug your door sensors and install the door delete kit! Allows manual control of the step sliders when the doors are removed from the Jeep. Easy installation!

Features:

Fits:

Includes:

A: It’s an add-on module that bypasses the door sensor for Rock Slide Engineering (RSE) power side steps, allowing manual control when doors are removed.

A: When doors are removed, you can manually deploy and retract the steps with the switch—no risk of accidental deployment.

A: Yes. Some users report accessing door sensor harness inside slider boxes or under trim; removal of trim may be needed.

Rock Slide Engineering’s JL and JT LED Light Pod Brackets are made with 10-gauge steel to firmly anchor your pod lights. We use a state-of-the-art automated powder coat system to for a textured black topcoat. Easy, no drill installation!

Note:
This product will not fit the JT Mojave edition of the Jeep.

Features:

Includes:
2 Light Pod Cowls
Additional Mounting Hardware

A: Yes, the kit includes both driver and passenger side brackets.

A: No, the brackets are low-profile and specifically designed to avoid interference with hood operation or wiper movement.

A: Yes, Rock Slide Engineering designs and manufactures all their products in the USA.

Rocker Guard plate for use on RS-E JL Step-Sliders only. Provides side impact coverage on the rocker panel and below the door frames. 1/4" nutserts hold body armor to sheet metal. Powder coated texture black. .090 Aluminum Made in USA

A: Yes, it’s specifically designed to fit all 2018–2023 Jeep Wrangler JL 4-door models when paired with Rock Slide Engineering Step Sliders.

A: It shields the rocker panel area from rocks, stumps, and other off-road obstacles.

A: No, they’re designed to work seamlessly with the automatic deployment and retraction of the step sliders.

Rocker Guard plate for use on RSE JL Step Sliders only. JL Step Sliders only. Provides side impact coverage on the rocker panel and below the door frames. Nutserts hold body armor to sheet metal. Powder coated texture black. .090 Aluminum, Made in USA

A: It shields the underside of the step sliders and your vehicle’s rocker area from rocks, logs, and trail obstacles that could cause damage during off-road driving.

A: Yes, Rock Slide Engineering proudly manufactures all their products in the USA.

Rocker Guard plate for use on RS-E JK Step-Sliders only. Provides side impact coverage on the rocker panel and below the door frames. 1/4" nutserts hold body armor to sheet metal. Powder coated texture black. .090 Aluminum Made in USA

A: 1/4" nutserts are inserted into the body panels to provide a solid installation

A: Constructed from durable steel and finished in a black powder coat for corrosion resistance and trail durability.

Rocker Guard plate for use on RSE JK Step Sliders only. JK Step Sliders only. Provides side impact coverage on the rocker panel and below the door frames. Nutserts hold body armor to sheet metal. Powder coated texture black. .090 Aluminum, Made in USA

A: Yes, this guard plate is designed as an add-on for use with Rock Slide Engineering Step Sliders only and will not fit properly without them.

A: It provides additional armor for your vehicle’s rocker panels, defending against rocks, stumps, and off-road hazards.

Provide more safety features for your vehicle when you install the Rock Slide Engineering Step Slider Light Kit. The light kit is designed to illuminate the step of your vehicle for better visibility. The step slider light kit is easy to install.

A: Yes. You'll just need to access the slider's connector under the rocker panel or carpet to plug it in

A: One kit covers both sides, so you'll need just one kit for a pair of sliders.

A: The plug-and-play design uses sealed connectors and is designed for rugged, exposed use.